albert/archery
1
0
Fork 0
mirror of https://gitlab.com/prism7/archery.git synced 2025-02-15 08:29:17 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
archery/Amelia.sh
Jane Doe ec7c24e1a4 Bumped up version, added semicolon
2024-02-19 17:58:49 +00:00

4491 lines
121 KiB
Bash
Raw Blame History

#!/bin/bash
# Amelia Installer
# Version: 3.5
set -euo pipefail
###########################################################################################
# ### COLOR FUNCTIONS ###
red="\e[31m"
redbg="\e[5;1;41m"
green="\e[32m"
yellow="\e[33m"
blue="\e[94m"
cyan="\e[36m"
purple="\e[35m"
nc="\e[0m"
blink="\e[5m"
reverse="\e[7m"
bright="\e[1m"
bwhite="\e[0;97m"
RED (){
echo -e "${red} $1${nc}"
}
REDB (){
echo -e "${redb} $1${nc}"
}
REDBG (){
echo -e "${redbg} $1${nc}"
}
GREEN (){
echo -e "${green} $1${nc}"
}
YELLOW (){
echo -e "${yellow} $1${nc}"
}
BLUE (){
echo -e "${blue} $1${nc}"
}
CYAN (){
echo -e "${cyan} $1${nc}"
}
PURPLE (){
echo -e "${purple} $1${nc}"
}
NC (){
echo -e "${nc} $1${nc}"
}
WHITEB (){
echo -e "${bwhite} $1${nc}"
}
# ### END COLOR FUNCTIONS ###
###########################################################################################
###########################################################################################
# ### PROMPT FUNCTIONS ###
skip (){
sleep 0.5
YELLOW "
--> Skipping.. "
}
#----------------------------------------------------------
reload (){
sleep 0.5
NC "
--> [${green}Reloading${nc}] "
}
#----------------------------------------------------------
invalid (){
sleep 0.5
RED "
[!] Invalid response "
reload
}
#----------------------------------------------------------
err_try (){
sleep 0.5
RED "
[!] Errors occured. Please try again.. "
reload
}
#----------------------------------------------------------
abort (){
sleep 0.5
RED "
[!] Aborting..
"
exit
}
#----------------------------------------------------------
err_abort (){
sleep 0.5
RED "
[!] Errors occured "
abort
}
#----------------------------------------------------------
umount_abort (){
sleep 0.5
RED "
[!] Errors occured
[!] Unmounting and Retrying.. "
reload
sleep 0.5
NC "
___________________________
${purple}###${nc} Unmount Filesystems ${purple}###${nc}
"
if umount -R /mnt; then
sleep 0.5
NC "
==> [${green}Unmount OK${nc}]"
else
sleep 0.5
RED "
[!] Unmounting failed "
abort
fi
reload
}
#----------------------------------------------------------
umount_manual (){
sleep 0.5
RED "
[!] Errors occured
[!] Unmounting and Retrying.. "
reload
sleep 0.5
NC "
___________________________
${purple}###${nc} Unmount Filesystems ${purple}###${nc}
"
if umount -R /mnt; then
sleep 0.5
NC "
==> [${green}Unmount OK${nc}]"
else
sleep 0.5
RED "
[!] Unmounting failed "
abort
fi
sleep 0.5
NC "
--> [Switching to ${green}Manual Mode${nc}]"
}
#----------------------------------------------------------
err_swapfile (){
sleep 0.5
RED "
[!] Swapfile creation error "
abort
}
#----------------------------------------------------------
err_reload (){
sleep 0.5
RED "
[!] Errors occured "
reload
}
#----------------------------------------------------------
err_instl_abort (){
sleep 0.5
RED "
[!] Warning: Installation errored
[!] Exiting..
"
exit
}
#----------------------------------------------------------
choice (){
sleep 0.5
RED "
[!] Please make a choice to continue "
reload
}
#----------------------------------------------------------
ok (){
sleep 0.5
NC "
==> [${green}${prompt} OK${nc}] "
}
#----------------------------------------------------------
completion (){
sleep 0.5
CYAN "
*******************************
### Installation Complete ###
$(date)
*******************************
"
}
# ### END PROMPT FUNCTIONS ###
###########################################################################################
###########################################################################################
# ### FUNCTIONS ###
first_check (){
if [[ -f /usr/share/kbd/consolefonts/ter-v20b.psf.gz && -f /usr/share/kbd/consolefonts/ter-v32b.psf.gz && "${tty}" == *"tty"* ]]; then
until slct_font; do : ; done
elif [[ -f /usr/share/kbd/consolefonts/ter-v20b.psf.gz && -f /usr/share/kbd/consolefonts/ter-v32b.psf.gz && "${tty}" == *"pts"* ]]; then
YELLOW "
### Supported 'Terminus Font' detected. Switch to console (tty) and re-run the installer to activate "
fi
if [[ "${run_as}" == "root" ]]; then
BLUE "
### The installer runs in [Root Mode]
"
REDBG " ----------------------------------------
### WARNING: High Risk Of Data Loss ###
----------------------------------------"
echo
else
PURPLE "
### The installer must be run as Root (Not 'wheel' group user) "
BLUE "
### Currently running with Limited Privileges [Test Mode]
"
fi
}
###########################################################################################
slct_font (){
sleep 0.5
NC "
______________________
${purple}###${nc} Font Selection ${purple}###${nc}
"
YELLOW "
> Select a Font: "
NC "
[1] Terminus Font
[2] HiDPI Terminus Font "
BLUE "
Enter a number: "
read -p "
==> " fontselect
if [[ "${fontselect}" == "1" ]]; then
setfont ter-v20b
elif [[ "${fontselect}" == "2" ]]; then
setfont ter-v32b
else
invalid
return 1
fi
clear
}
###########################################################################################
uefi_check (){
local prompt="UEFI Mode"
sleep 0.5
NC "
______________________________
${purple}###${nc} UEFI Mode Verification ${purple}###${nc}
"
if [[ -e /sys/firmware/efi/efivars ]]; then
ok
else
RED "
[!] Not in UEFI Mode "
abort
fi
}
###########################################################################################
upd_clock (){
local prompt="System Clock"
sleep 0.5
NC "
___________________________
${purple}###${nc} System Clock Update ${purple}###${nc}
"
timedatectl set-ntp true
ok
}
###########################################################################################
dtct_microcode (){
local prompt="Microcode"
sleep 0.5
NC "
___________________________
${purple}###${nc} Microcode Detection ${purple}###${nc}
"
CPU="$(grep vendor_id /proc/cpuinfo)"
if [[ "${CPU}" == *"GenuineIntel"* ]]; then
microcode="intel-ucode"
nrg_plc="x86_energy_perf_policy"
microname="'Intel'"
else
microcode="amd-ucode"
microname="'AMD'"
fi
sleep 0.5
YELLOW "
### Detection completed, the ""${microname}"" microcode will be installed
"
ok
}
###########################################################################################
main_menu (){
sleep 0.5
NC "
_________________
${purple}###${nc} Main Menu ${purple}###${nc}
"
YELLOW "
> Select a Submenu: "
NC "
[1] Personalization
[2] System Configuration
[3] Disk Management
[4] Start Installation (${cyan}Auto-Navigation${nc}) "
BLUE "
Enter a number: "
read -p "
==> " menu
case "${menu}" in
1)
until persnl_submn; do : ; done ;;
2)
until sys_submn; do : ; done ;;
3)
until dsks_submn; do : ; done ;;
4)
instl ;;
"")
sleep 0.5
RED "
[!] Please select a Submenu "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
}
###########################################################################################
persnl_submn (){
sleep 0.5
NC "
_______________________
${purple}###${nc} Personalization ${purple}###${nc}
"
YELLOW "
> Select a Submenu: "
NC "
[1] Locale & Keyboard Layout Setup
[2] User, Root User & Hostname Setup
[ ] Return to Main Menu "
BLUE "
Enter a number: "
read -p "
==> " persmenu
case "${persmenu}" in
1)
until slct_locale; do : ; done
until slct_kbd; do : ; done
return 1 ;;
2)
until user_setup; do : ; done
until rootuser_setup; do : ; done
until slct_hostname; do : ; done
return 1 ;;
"")
until main_menu; do : ; done ;;
*)
invalid
return 1 ;;
esac
}
###########################################################################################
slct_locale (){
local prompt="Locale"
sleep 0.5
NC "
________________________
${purple}###${nc} Locale Selection ${purple}###${nc}
"
YELLOW "
> Select your Locale [Hit ${nc}'l'${yellow} to list locales] "
BLUE "
Enter your Locale ${bwhite}(empty for 'en_US')${blue}: "
read -p "
==> " SETLOCALE
if [[ -z "${SETLOCALE}" ]]; then
SETLOCALE="en_US.UTF-8"
sleep 0.5
YELLOW "
### 'en_US' Locale has been selected
"
elif [[ "${SETLOCALE}" == "l" ]]; then
more /etc/locale.gen
return 1
elif ! grep -q "^#\?$(sed 's/[].*[]/\\&/g' <<< "${SETLOCALE}") " /etc/locale.gen; then
invalid
return 1
else
sleep 0.5
YELLOW "
### '"${SETLOCALE}"' Locale has been selected
"
fi
ok
}
###########################################################################################
slct_kbd (){
local prompt="Keyboard Layout"
sleep 0.5
NC "
_________________________________
${purple}###${nc} Keyboard Layout Selection ${purple}###${nc}
"
YELLOW "
> Select your Keyboard Layout [Hit ${nc}'l'${yellow} to list layouts] "
BLUE "
Enter your keyboard layout ${bwhite}(empty for 'us')${blue}: "
read -p "
==> " SETKBD
if [[ -z "${SETKBD}" ]]; then
SETKBD="us"
sleep 0.5
YELLOW "
### 'us' Keyboard Layout has been selected
"
elif [[ "${SETKBD}" == "l" ]]; then
localectl list-keymaps | more
return 1
elif ! localectl list-keymaps | grep -Fxq "${SETKBD}"; then
invalid
return 1
else
sleep 0.5
YELLOW "
### '"${SETKBD}"' Keyboard Layout has been selected
"
loadkeys "${SETKBD}"
fi
ok
}
###########################################################################################
user_setup (){
local prompt="User"
sleep 0.5
NC "
__________________
${purple}###${nc} User Setup ${purple}###${nc}
"
BLUE "
Enter a username: "
read -p "
==> " USERNAME
echo
if [[ -z "${USERNAME}" ]]; then
sleep 0.5
RED "
[!] Please enter a username to continue "
reload
return 1
elif [[ "${USERNAME}" =~ [[:upper:]] ]]; then
sleep 0.5
RED "
[!] Uppercase is not allowed. Please try again.. "
reload
return 1
fi
BLUE "
Enter a password for${nc} ${cyan}"${USERNAME}"${blue}: "
read -p "
==> " USERPASSWD
echo
if [[ -z "${USERPASSWD}" ]]; then
sleep 0.5
RED "
[!] Please enter a password for "${USERNAME}" to continue "
reload
return 1
fi
BLUE "
Re-enter${nc} ${cyan}"${USERNAME}"'s ${blue}password: "
read -p "
==> " USERPASSWD2
echo
if [[ "${USERPASSWD}" != "${USERPASSWD2}" ]]; then
sleep 0.5
RED "
[!] Passwords don't match. Please try again.. "
reload
return 1
fi
ok
}
###########################################################################################
rootuser_setup (){
local prompt="Root User"
sleep 0.5
NC "
_______________________
${purple}###${nc} Root User Setup ${purple}###${nc}
"
BLUE "
Enter a password for the${nc}${cyan} Root ${blue}user: "
read -p "
==> " ROOTPASSWD
if [[ -z "${ROOTPASSWD}" ]]; then
sleep 0.5
RED "
[!] Please enter a password for the Root user to continue "
reload
return 1
fi
BLUE "
Re-enter${nc} ${cyan}Root ${blue}user's password: "
read -p "
==> " ROOTPASSWD2
echo
if [[ "${ROOTPASSWD}" != "${ROOTPASSWD2}" ]]; then
sleep 0.5
RED "
[!] Passwords don't match. Please try again.. "
reload
return 1
fi
ok
}
###########################################################################################
slct_hostname (){
local prompt="Hostname"
sleep 0.5
NC "
______________________
${purple}###${nc} Hostname Setup ${purple}###${nc}
"
BLUE "
Enter a hostname: "
read -p "
==> " HOSTNAME
echo
if [[ -z "${HOSTNAME}" ]]; then
sleep 0.5
RED "
[!] Please enter a hostname to continue "
reload
return 1
elif [[ "${HOSTNAME}" =~ [[:upper:]] ]]; then
sleep 0.5
RED "
[!] Lowercase is preferred. Please try again.. "
reload
return 1
fi
ok
}
###########################################################################################
sys_submn (){
sleep 0.5
NC "
____________________________
${purple}###${nc} System Configuration ${purple}###${nc}
"
YELLOW "
> Select a Submenu: "
NC "
[1] Kernel & Bootloader Setup
[2] Filesystem & Swap Setup
[3] Graphics Setup
[4] Desktop Setup
[5] EFI Boot Entries Deletion
[6] Wireless Regulatory Domain Setup
[ ] Return to Main Menu "
BLUE "
Enter a number: "
read -p "
==> " sysmenu
case "${sysmenu}" in
1)
until slct_krnl; do : ; done
until ask_bootldr; do : ; done
return 1 ;;
2)
until ask_fs; do : ; done
until ask_swap; do : ; done
return 1 ;;
3)
until dtct_vga; do : ; done
return 1 ;;
4)
until slct_dsktp; do : ; done
return 1 ;;
5)
until boot_entr; do : ; done
return 1 ;;
6)
until wireless_rgd; do : ; done
return 1 ;;
"")
until main_menu; do : ; done ;;
*)
invalid
return 1 ;;
esac
}
###########################################################################################
slct_krnl (){
local prompt="Kernel"
sleep 0.5
NC "
________________________
${purple}###${nc} Kernel Selection ${purple}###${nc}
"
YELLOW "
> Select a Kernel: "
NC "
[1] Linux
[2] Linux LTS
[3] Linux Hardened
[4] Linux Zen "
BLUE "
Enter a number: "
read -p "
==> " kernelnmbr
case "${kernelnmbr}" in
1)
kernel="linux"
kernelname="'Linux'"
entrname="Arch Linux" ;;
2)
kernel="linux-lts"
kernelname="'Linux LTS'"
entrname="Arch Linux LTS" ;;
3)
kernel="linux-hardened"
kernelname="'Linux Hardened'"
entrname="Arch Linux Hardened" ;;
4)
kernel="linux-zen"
kernelname="'Linux Zen'"
entrname="Arch Linux Zen" ;;
"")
sleep 0.5
RED "
[!] Please select a Kernel "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
sleep 0.5
YELLOW "
### The ${kernelname} kernel has been selected
"
if [[ "${kernelnmbr}" == "3" ]]; then
CYAN "
[!] Swapping is not supported
"
fi
ok
}
###########################################################################################
ask_bootldr (){
local prompt="Bootloader"
sleep 0.5
NC "
____________________________
${purple}###${nc} Bootloader Selection ${purple}###${nc}
"
YELLOW "
> Select a Bootloader: "
NC "
[1] Systemd-boot
[2] Grub "
BLUE "
Enter a number: "
read -p "
==> " bootloader
case "${bootloader}" in
1)
sleep 0.5
YELLOW "
### 'Systemd-boot' has been selected
" ;;
2)
sleep 0.5
YELLOW "
### 'Grub' has been selected
" ;;
"")
sleep 0.5
RED "
[!] Please select a Bootloader "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
ok
}
###########################################################################################
ask_fs (){
local prompt="Filesystem Setup"
sleep 0.5
NC "
____________________________
${purple}###${nc} Filesystem Selection ${purple}###${nc}
"
YELLOW "
> Select Filesystem to be used: "
NC "
[1] Ext4
[2] Btrfs "
BLUE "
Enter a number: "
read -p "
==> " fs
echo
case "${fs}" in
1)
fsname="'Ext4'"
fs_mod="ext4"
fstools="e2fsprogs"
roottype="/ROOT"
sleep 0.5
YELLOW "
### "${fsname}" has been selected
" ;;
2)
fsname="'Btrfs'"
fs_mod="btrfs"
fstools="btrfs-progs"
roottype="/@"
btrfs_opts="rootflags=subvol=@"
sleep 0.5
YELLOW "
### "${fsname}" has been selected
"
sleep 0.5
YELLOW "
> Label your Btrfs snapshot directory: "
BLUE "
Enter a name: "
read -p "
==> " snapname
if [[ -z "${snapname}" ]]; then
invalid
return 1
fi ;;
"")
sleep 0.5
RED "
[!] Please select a Filesystem "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
ok
}
###########################################################################################
ask_swap (){
local prompt="Swap Setup"
sleep 0.5
NC "
______________________
${purple}###${nc} Swap Selection ${purple}###${nc}
"
YELLOW "
> Select Swap type: "
NC "
[1] Swap Partition
[2] Swapfile
[3] None "
BLUE "
Enter a number: "
read -p "
==> " swapmode
case "${swapmode}" in
1)
swaptype="swappart"
sleep 0.5
YELLOW "
### Swap Partition has been selected
" ;;
2)
if [[ "${fs}" == "1" ]]; then
swaptype="swapfile"
elif [[ "${fs}" == "2" ]]; then
swaptype="swapfile_btrfs"
fi
sleep 0.5
YELLOW "
### Swapfile has been selected
"
until set_swapsize; do : ; done ;;
3)
sleep 0.5
YELLOW "
### No Swap will be used
"
skip ;;
"")
sleep 0.5
RED "
[!] Please make a selection to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
ok
}
###########################################################################################
set_swapsize (){
local prompt="Swapsize"
BLUE "
Enter Swapfile size ${bwhite}(in GiB)${blue}: "
read -p "
==> " swapsize
echo
if [[ -z "${swapsize}" ]]; then
sleep 0.5
RED "
[!] Please enter a value to continue "
reload
NC "
"
return 1
elif [[ "${swapsize}" =~ [[:digit:]] ]]; then
ok
else
sleep 0.5
RED "
[!] Please use only digits as a value "
reload
NC "
"
return 1
fi
}
###########################################################################################
dtct_vga (){
local prompt="Graphics"
sleep 0.5
NC "
______________________
${purple}###${nc} Graphics Setup ${purple}###${nc}
"
vgacount="$(lspci | grep -E -c 'VGA|Display|3D')"
vgacard="$(lspci | grep -E 'VGA|Display|3D' | sed 's/^.*: //g')"
intelcount="$(lspci | grep -E 'VGA|Display|3D' | grep -E -c 'Intel Corporation')"
intelcards="$(lspci | grep -E 'VGA|Display|3D' | grep -E 'Intel Corporation'| sed 's/.*Corporation //g' | cat --number | sed 's/.[0-9]//')"
amdcount="$(lspci | grep -E 'VGA|Display|3D' | grep -E -c 'Advanced Micro Devices')"
amdcards="$(lspci | grep -E 'VGA|Display|3D' | grep -E 'Advanced Micro Devices' | sed 's/.*\[AMD\/ATI\] //g' | cat --number | sed 's/.[0-9]//')"
nvidiacount="$(lspci | grep -E 'VGA|Display|3D' | grep -E -c 'NVIDIA Corporation')"
nvidiacards="$(lspci | grep -E 'VGA|Display|3D' | grep -E 'NVIDIA Corporation'| sed 's/.*Corporation //g' | cat --number | sed 's/.[0-9]//')"
hypervisor="$(systemd-detect-virt)"
if [[ "${vgacount}" == "1" ]]; then
if [[ "${intelcount}" -ge "1" ]]; then
vendor="Intel"
sourcetype="Open-source"
perf_stream="dev.i915.perf_stream_paranoid = 0"
vgapkgs="intel-media-driver libva-intel-driver vulkan-intel vulkan-mesa-layers"
elif [[ "${amdcount}" -ge "1" ]]; then
vendor="AMD"
sourcetype="Open-source"
vgapkgs="libva-mesa-driver mesa-vdpau vulkan-mesa-layers vulkan-radeon"
elif [[ "${nvidiacount}" -ge "1" ]]; then
vendor="Nvidia"
sourcetype="Proprietary"
elif [[ "${hypervisor}" != "none" ]]; then
vendor="Virtual Machine"
case "${hypervisor}" in
kvm)
vmpkgs="spice spice-vdagent spice-protocol spice-gtk qemu-guest-agent"
vm_services="qemu-guest-agent" ;;
vmware)
vmpkgs="open-vm-tools"
vm_services="vmtoolsd vmware-vmblock-fuse" ;;
oracle)
vmpkgs="virtualbox-guest-utils"
vm_services="vboxservice" ;;
microsoft)
vmpkgs="hyperv"
vm_services="hv_fcopy_daemon hv_kvp_daemon hv_vss_daemon" ;;
esac
fi
sleep 0.5
YELLOW "
### ""${vendor}"" Graphics detected : ${nc}""${vgacard}"""
if [[ "${vendor}" == "Virtual Machine" ]]; then
vgaconf="n"
echo
skip
ok
return 0
fi
YELLOW "
### "${sourcetype}" drivers will be used
> Enable HW acceleration and auto-configure the graphics subsystem ? [y/n]
"
if [[ "${vendor}" == "Nvidia" ]]; then
RED "
[!] Supported architectures: NV110 (Maxwell) Graphics or newer "
fi
BLUE "
Enter [y/n]: "
read -p "
==> " vgaconf
if [[ "${vgaconf}" == "y" ]]; then
if [[ "${vendor}" == "AMD" ]]; then
sleep 0.5
YELLOW "
> Enable 'amdgpu' driver support for: "
NC "
[1] 'Southern Islands' Graphics
[2] 'Sea Islands' Graphics "
BLUE "
Enter a number ${bwhite}(empty to skip)${blue}: "
read -p "
==> " islands
if [[ -z "${islands}" ]]; then
skip
echo
elif [[ "${islands}" == "1" ]]; then
NC "
==> [${green}Southern Islands OK${nc}]
"
elif [[ "${islands}" == "2" ]]; then
NC "
==> [${green}Sea Islands OK${nc}]
"
else
invalid
return 1
fi
elif [[ "${vendor}" == "Nvidia" ]]; then
sleep 0.5
YELLOW "
> Select Nvidia architecture: "
NC "
[1] NV110 (Maxwell) Graphics or newer
[2] NV160 (Turing) Graphics or newer "
BLUE "
Enter a number: "
read -p "
==> " family
if [[ "${family}" == "1" ]]; then
NC "
==> [${green}Maxwell+ OK${nc}]
"
elif [[ "${family}" == "2" ]]; then
sleep 0.5
YELLOW "
> Select Nvidia driver: "
NC "
[1] 'Nvidia-Open' driver
[2] 'Nvidia' driver "
BLUE "
Enter a number: "
read -p "
==> " nvdriver
if [[ "${nvdriver}" == "1" ]]; then
NC "
==> [${green}Turing+ OK${nc}]
"
elif [[ "${nvdriver}" == "2" ]]; then
NC "
==> [${green}Turing+ OK${nc}]
"
else
echo
invalid
return 1
fi
else
echo
invalid
return 1
fi
if [[ "${kernelnmbr}" == "1" ]]; then
if [[ "${family}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia nvidia-settings nvidia-utils opencl-nvidia"
nvname="nvidia"
elif [[ "${family}" == "2" ]]; then
if [[ "${nvdriver}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-open nvidia-settings nvidia-utils opencl-nvidia"
nvname="nvidia-open"
elif [[ "${nvdriver}" == "2" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia nvidia-settings nvidia-utils opencl-nvidia"
nvname="nvidia"
fi
fi
elif [[ "${kernelnmbr}" == "2" ]]; then
if [[ "${family}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-lts nvidia-settings nvidia-utils opencl-nvidia"
nvname="nvidia-lts"
elif [[ "${family}" == "2" ]]; then
if [[ "${nvdriver}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-open-dkms nvidia-settings nvidia-utils opencl-nvidia"
elif [[ "${nvdriver}" == "2" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-lts nvidia-settings nvidia-utils opencl-nvidia"
nvname="nvidia-lts"
fi
fi
else
if [[ "${family}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-dkms nvidia-settings nvidia-utils opencl-nvidia"
elif [[ "${family}" == "2" ]]; then
if [[ "${nvdriver}" == "1" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-open-dkms nvidia-settings nvidia-utils opencl-nvidia"
elif [[ "${nvdriver}" == "2" ]]; then
vgapkgs="libva-nvidia-driver libvdpau-va-gl nvidia-dkms nvidia-settings nvidia-utils opencl-nvidia"
fi
fi
fi
fi
sleep 0.5
YELLOW "
### ""${vendor}"" Graphics will be automatically configured
"
elif [[ "${vgaconf}" == "n" ]]; then
echo
skip
else
invalid
return 1
fi
else
if [[ "${vgacount}" == "2" ]]; then
vendor="Dual"
elif [[ "${vgacount}" == "3" ]]; then
vendor="Triple"
fi
sleep 0.5
YELLOW "
### "${vendor}" Graphics setup detected, consisting of: "
NC "
_______________________________"
if [[ "${intelcount}" -ge "1" ]]; then
perf_stream="dev.i915.perf_stream_paranoid = 0"
NC "
["${intelcount}"] Intel Graphics device(s)
${intelcards}
_______________________________"
fi
if [[ "${amdcount}" -ge "1" ]]; then
NC "
["${amdcount}"] AMD Graphics device(s)
${amdcards}
_______________________________"
fi
if [[ "${nvidiacount}" -ge "1" ]]; then
NC "
["${nvidiacount}"] Nvidia Graphics device(s)
${nvidiacards}
_______________________________"
fi
YELLOW "
> Please configure the graphics subsystem after installation has finished
"
fi
ok
}
###########################################################################################
slct_dsktp (){
local prompt="Desktop Setup"
custompkgs=""
sleep 0.5
NC "
_________________________
${purple}###${nc} Desktop Selection ${purple}###${nc}
"
YELLOW "
> Select a Desktop: "
NC "
[1] Plasma
[2] Plasma & Systemd-boot & Wayland (System Optimized)
[3] Gnome
[4] Xfce
[5] Cinnamon
[6] Deepin
[7] Budgie
[8] Lxqt
[9] Mate
[10] Base System (No Desktop)
[11] Custom System ${red}[!] EXPERTS ONLY [!]"
BLUE "
Enter a number: "
read -p "
==> " packages
case "${packages}" in
1)
desktopname="'Plasma'" ;;
2)
desktopname="'Plasma (System Optimized)'" ;;
3)
desktopname="'Gnome'" ;;
4)
desktopname="'Xfce'" ;;
5)
desktopname="'Cinnamon'"
sleep 0.5
YELLOW "
### NOTE: Cinnamon desktop lacks a native Terminal emulator by design
### You can use linux console (ctrl+alt+F3) for shell access
> Install 'gnome-terminal' for convenience ? [y/n] "
BLUE "
Enter [y/n]: "
read -p "
==> " console
case "${console}" in
y)
terminal="gnome-terminal"
sleep 0.5
NC "
==> [${green}Terminal OK${nc}] " ;;
n)
echo
skip ;;
"")
sleep 0.5
echo
RED "
[!] Please type 'y' or 'n' to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac ;;
6)
desktopname="'Deepin'" ;;
7)
desktopname="'Budgie'"
sleep 0.5
YELLOW "
### NOTE: Budgie desktop lacks a native Terminal emulator by design
### You can use linux console (ctrl+alt+F3) for shell access
> Install 'gnome-terminal' for convenience ? [y/n] "
BLUE "
Enter [y/n]: "
read -p "
==> " console
case "${console}" in
y)
terminal="gnome-terminal"
sleep 0.5
NC "
==> [${green}Terminal OK${nc}] " ;;
n)
echo
skip ;;
"")
sleep 0.5
echo
RED "
[!] Please type 'y' or 'n' to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac ;;
8)
desktopname="'Lxqt'" ;;
9)
desktopname="'Mate'" ;;
10)
desktopname="'Base System'" ;;
11)
desktopname="'Custom System'"
until cust_sys; do :; done
return 0 ;;
"")
sleep 0.5
RED "
[!] Please make a selection.. "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
sleep 0.5
YELLOW "
### ${desktopname} has been selected
### NOTE: 'base' package group does not include the tools needed for building packages
> Install 'base-devel' package group ? [y/n] "
BLUE "
Enter [y/n]: "
read -p "
==> " dev
case "${dev}" in
y)
devel="base-devel"
sleep 0.5
NC "
==> [${green}base-devel OK${nc}] " ;;
n)
echo
skip ;;
"")
sleep 0.5
echo
RED "
[!] Please type 'y' or 'n' to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
sleep 0.5
YELLOW "
### NOTE: Custom Kernel Parameters can be set at boot time
> Enter your own Kernel Parameters ? [y/n] "
BLUE "
Enter [y/n]: "
read -p "
==> " ask_param
case "${ask_param}" in
y)
add_prmtrs ;;
n)
echo
skip ;;
"")
sleep 0.5
echo
RED "
[!] Please type 'y' or 'n' to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
ok
}
###########################################################################################
cust_sys (){
local prompt="Custom System"
until add_pkgs; do : ; done
until add_services; do : ; done
until add_prmtrs; do : ; done
ok
}
###########################################################################################
add_pkgs (){
local prompt="Custom Packages"
sleep 0.5
NC "
_____________________________
${purple}###${nc} Custom Packages Setup ${purple}###${nc}
"
BLUE "
Enter your packages ${bwhite}(space-seperated)${blue}: "
read -p "
==> " custompkgs
if [[ -z "${custompkgs}" ]]; then
sleep 0.5
RED "
[!] Please enter package(s) to continue "
reload
return 1
elif [[ "${custompkgs}" =~ "lightdm" ]]; then
echo
sleep 0.5
NC "
_________________________________
${purple}###${nc} Lightdm Greeter Selection ${purple}###${nc}
"
YELLOW "
> Select a Greeter: "
NC "
[1] Gtk
[2] Slick "
BLUE "
Enter a number: "
read -p "
==> " greeternmbr
case "${greeternmbr}" in
1)
greeter="lightdm-gtk-greeter"
sleep 0.5
NC "
==> [${green}Lightdm Gtk Greeter OK${nc}] " ;;
2)
greeter="lightdm-slick-greeter"
sleep 0.5
NC "
==> [${green}Lightdm Slick Greeter OK${nc}] " ;;
"")
sleep 0.5
echo
RED "
[!] Please make a selection.. "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
else
ok
fi
}
###########################################################################################
add_services (){
local prompt="Custom Services"
sleep 0.5
NC "
_____________________________
${purple}###${nc} Custom Services Setup ${purple}###${nc}
"
YELLOW "
### Empty to skip "
BLUE "
Enter your services ${bwhite}(space-seperated)${blue}: "
read -p "
==> " customservices
if [[ -z "${customservices}" ]]; then
echo
skip
else
ok
fi
}
###########################################################################################
add_prmtrs (){
local prompt="Kernel Parameters"
sleep 0.5
NC "
______________________________________
${purple}###${nc} Custom Kernel Parameters Setup ${purple}###${nc}
"
YELLOW "
### Empty to skip "
BLUE "
Enter your Kernel parameters ${bwhite}(space-seperated)${blue}: "
read -p "
==> " cust_bootopts
if [[ -z "${cust_bootopts}" ]]; then
echo
skip
else
ok
fi
}
###########################################################################################
boot_entr (){
local prompt="Boot Entries"
efi_entr_del="1"
sleep 0.5
NC "
_________________________________
${purple}###${nc} EFI Boot Entries Deletion ${purple}###${nc}
"
YELLOW "
> Select an EFI Boot Entry to Delete ${red}[!] (CAUTION) [!]${yellow}
"
sleep 0.5
efibootmgr
boot_entry=" "
while [[ -n "${boot_entry}" ]]; do
BLUE "
Enter a${nc} ${cyan}BootOrder${blue} number for Deletion ${bwhite}(empty to skip)${blue}: "
read -p "
==> " boot_entry
echo
if [[ -n "${boot_entry}" ]]; then
if [[ "${run_as}" != "root" ]]; then
sleep 0.5
RED "
[!] Root Privileges Missing.. "
reload
until sys_submn; do : ; done
fi
if efibootmgr -b "${boot_entry}" -B; then
sleep 0.5
NC "
==> [${green}Entry "${boot_entry}" Deleted${nc}] "
else
err_try
return 1
fi
else
skip
ok
fi
done
}
###########################################################################################
wireless_rgd (){
local prompt="Wireless Regdom Setup"
wrlss_rgd="1"
hypervisor="$(systemd-detect-virt)"
sleep 0.5
NC "
________________________________________
${purple}###${nc} Wireless Regulatory Domain Setup ${purple}###${nc}
"
if [[ "${hypervisor}" != "none" ]]; then
sleep 0.5
YELLOW "
### Virtual Machine detected
"
skip
ok
echo
return 0
fi
BLUE "
Enter your Country Code, ie:${nc} ${cyan}US ${bwhite}(empty to skip)${blue}: "
read -p "
==> " REGDOM
if [[ -z "${REGDOM}" ]]; then
echo
skip
elif [[ "${REGDOM}" =~ [[:lower:]] ]]; then
sleep 0.5
RED "
[!] Lowercase is not allowed. Please try again.. "
reload
return 1
elif ! [[ "${REGDOM}" =~ ^(00|AD|AE|AF|AI|AL|AM|AN|AR|AS|AT|AU|AW|AZ|BA|BB|BD|BE|BF|BG|BH|BL|BM|BN|BO|BR|BS|BT|BY|BZ|CA|CF|CH|CI|CL|CN|CO|CR|CU|CX|CY|CZ|DE|DK|DM|DO|DZ|EC|EE|EG|ES|ET|FI|FM|FR|GB|GD|GE|GF|GH|GL|GP|GR|GT|GU|GY|HK|HN|HR|HT|HU|ID|IE|IL|IN|IR|IS|IT|JM|JO|JP|KE|KH|KN|KP|KR|KW|KY|KZ|LB|LC|LI|LK|LS|LT|LU|LV|MA|MC|MD|MF|MH|MK|MN|MO|MP|MQ|MR|MT|MU|MV|MW|MX|MY|NG|NI|NL|NO|NP|NZ|OM|PA|PE|PF|PG|PH|PK|PL|PM|PR|PT|PY|PY|QA|RE|RO|RS|RU|RW|SA|SE|SG|SI|SK|SN|SR|SV|SY|TC|TD|TG|TH|TN|TR|TT|TW|TZ|UA|UG|US|UY|UZ|VC|VE|VI|VN|VU|WF|WS|YE|YT|ZA|ZW)$ ]]; then
invalid
return 1
else
wireless_reg="wireless-regdb"
sleep 0.5
YELLOW "
### '"${REGDOM}"' Country Code has been selected
"
fi
ok
}
###########################################################################################
dsks_submn (){
sleep 0.5
NC "
_______________________
${purple}###${nc} Disk Management ${purple}###${nc}
"
YELLOW "
> Select a Submenu: "
NC "
[1] Disk GPT Manager
[2] Partition Manager
[3] Installation Disk & Encryption
[ ] Return to Main Menu "
BLUE "
Enter a number: "
read -p "
==> " diskmenu
case ${diskmenu} in
1)
until gpt_mngr; do : ; done ;;
2)
until disk_mngr; do : ; done ;;
3)
until instl_dsk; do : ; done
if [[ -z "${fs}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Filesystem Setup' to continue
"
until ask_fs; do : ; done
fi
until ask_crypt; do : ; done
return 1 ;;
"")
until main_menu; do : ; done ;;
*)
invalid
return 1 ;;
esac
}
###########################################################################################
gpt_mngr (){
local prompt="Disk GPT"
sleep 0.5
NC "
________________________
${purple}###${nc} Disk GPT Manager ${purple}###${nc}
"
gpt_dsk_nmbr=" "
while [[ -n "${gpt_dsk_nmbr}" ]]; do
YELLOW "
> Select a disk to manage its GPT: "
NC "
${disks} "
BLUE "
Enter a disk number ${bwhite}(empty to skip)${blue}: "
read -p "
==> " gpt_dsk_nmbr
if [[ -n "${gpt_dsk_nmbr}" ]]; then
gptdrive="$(echo "${disks}" | awk "\$1 == "${gpt_dsk_nmbr}" { print \$2}")"
if [[ -e "${gptdrive}" ]]; then
if [[ "${run_as}" != "root" ]]; then
sleep 0.5
RED "
[!] Root Privileges Missing.. "
reload
until dsks_submn; do : ; done
fi
NC "
______________________________________________
"
gdisk "${gptdrive}"
sleep 0.5
NC "
==> [${green}${gptdrive} OK${nc}] "
else
invalid
return 1
fi
else
skip
ok
if [[ "${install}" == "yes" ]]; then
until instl_dsk; do : ; done
else
until dsks_submn; do : ; done
fi
fi
done
}
###########################################################################################
disk_mngr (){
local prompt="Disks"
sleep 0.5
NC "
_________________________
${purple}###${nc} Partition Manager ${purple}###${nc}
"
cgdsk_nmbr=" "
while [[ -n "${cgdsk_nmbr}" ]]; do
NC "
- - - - - - - - - - - - - - - - - -
Discoverable Partitions GUID Codes:
${cyan}EFI${nc} system partition > ${cyan}ef00${nc}
Linux x86-64 ${cyan}root (/)${nc} > ${cyan}8304${nc}
Linux ${cyan}/home${nc} > ${cyan}8302${nc}
Linux ${cyan}swap${nc} > ${cyan}8200${nc}
- - - - - - - - - - - - - - - - - -
"
YELLOW "
> Select a disk to Manage: "
NC "
${disks}"
BLUE "
Enter a disk number ${bwhite}(empty to skip)${blue}: "
read -p "
==> " cgdsk_nmbr
if [[ -n "${cgdsk_nmbr}" ]]; then
drive="$(echo "${disks}" | awk "\$1 =="${cgdsk_nmbr}" {print \$2}")"
if [[ -e "${drive}" ]]; then
if [[ "${run_as}" != "root" ]]; then
sleep 0.5
RED "
[!] Root Privileges Missing.. "
reload
until dsks_submn; do : ; done
fi
cgdisk "${drive}"
clear
sleep 0.5
NC "
==> [${green}Disk "${drive}" OK${nc}] "
return 1
else
invalid
return 1
fi
else
skip
ok
if [[ -z "${sanity}" ]]; then
until dsks_submn; do : ; done
elif [[ "${sanity}" == "no" ]]; then
until instl_dsk; do : ; done
elif [[ "${revision}" == "yes" ]]; then
return 0
elif [[ "${sanity}" == "ok" ]]; then
if [[ "${install}" == "yes" ]]; then
return 0
fi
until dsks_submn; do : ; done
fi
fi
done
}
###########################################################################################
instl_dsk (){
sleep 0.5
NC "
___________________________________
${purple}###${nc} Installation Disk Selection ${purple}###${nc}
"
YELLOW "
> Select a disk to Install to: "
NC "
${disks} "
BLUE "
Enter a disk number: "
read -p "
==> " instl_dsk_nmbr
echo
if [[ -n "${instl_dsk_nmbr}" ]]; then
instl_drive="$(echo "${disks}" | awk "\$1 == "${instl_dsk_nmbr}" {print \$2}")"
if [[ -e "${instl_drive}" ]]; then
if [[ "${run_as}" != "root" ]]; then
sleep 0.5
RED "
[!] Root Privileges Missing.. "
reload
until dsks_submn; do : ; done
fi
volumes="$(fdisk -l | grep '^/dev' | cat --number)"
rota="$(lsblk "${instl_drive}" --nodeps --noheadings --output=rota | awk "{print \$1}")"
if [[ "${rota}" == "0" ]]; then
sbvl_mnt_opts="rw,noatime,compress=zstd:1"
trim="fstrim.timer"
else
sbvl_mnt_opts="rw,compress=zstd"
fi
parttable="$(fdisk -l "${instl_drive}" | grep '^Disklabel type' | awk "{print \$3}")"
if [[ "${parttable}" != "gpt" ]]; then
sleep 0.5
RED "
[!] No GPT found on selected disk "
reload
until gpt_mngr; do : ; done
return 0
fi
until sanity_check; do : ; done
else
invalid
return 1
fi
else
choice
return 1
fi
}
###########################################################################################
sanity_check (){
local prompt="Installation Disk"
sleep 0.5
NC "
____________________
${purple}###${nc} Sanity Check ${purple}###${nc}
"
root_dev="$(fdisk -l "${instl_drive}" | grep 'root' | awk "{print \$1}")"
boot_dev="$(fdisk -l "${instl_drive}" | grep 'EFI' | awk "{print \$1}")"
home_dev="$(fdisk -l "${instl_drive}" | grep 'home' | awk "{print \$1}")"
swap_dev="$(fdisk -l "${instl_drive}" | grep 'swap' | awk "{print \$1}")"
if [[ ! -e "${root_dev}" && ! -e "${boot_dev}" ]]; then
sanity="no"
sleep 0.5
RED "
[!] Linux x86-64 Root (/) Partition not detected "
sleep 0.5
RED "
[!] EFI System Partition not detected "
sleep 0.5
YELLOW "
--> Please comply with the Discoverable Partitions Specification to continue..
### Ensure that a Linux x86-64 Root (/) Partition with a valid GUID code ${nc}(8304)${yellow} is present on disk
### Ensure that an EFI System Partition with a valid GUID code ${nc}(ef00)${yellow} is present on disk "
sleep 0.5
RED "
[!] Sanity Check Failed [!] "
sleep 2
reload
until disk_mngr; do : ; done
return 0
elif [[ ! -e "${root_dev}" && -e "${boot_dev}" ]]; then
sanity="no"
sleep 0.5
NC "
==> [EFI System Partition ${green}OK${nc}] "
sleep 0.5
RED "
[!] Linux x86-64 Root (/) Partition not detected "
sleep 0.5
YELLOW "
--> Please comply with the Discoverable Partitions Specification to continue..
### Ensure that a Linux x86-64 Root (/) Partition with a valid GUID code ${nc}(8304)${yellow} is present on disk "
sleep 0.5
RED "
[!] Sanity Check Failed [!] "
sleep 2
reload
until disk_mngr; do : ; done
return 0
elif [[ -e "${root_dev}" && ! -e "${boot_dev}" ]]; then
sanity="no"
sleep 0.5
NC "
==> [Linux x86-64 Root (/) ${green}OK${nc}] "
sleep 0.5
RED "
[!] EFI Partition not detected "
sleep 0.5
YELLOW "
--> Please comply with the Discoverable Partitions Specification to continue..
### Ensure that an EFI System Partition with a valid GUID code ${nc}(ef00)${yellow} is present on disk "
sleep 0.5
RED "
[!] Sanity Check Failed [!] "
sleep 2
reload
until disk_mngr; do : ; done
return 0
elif [[ -e "${root_dev}" && -e "${boot_dev}" ]]; then
sleep 0.5
NC "
==> [Linux x86-64 Root (/) ${green}OK${nc}] "
sleep 0.5
NC "
==> [EFI System Partition ${green}OK${nc}] "
if [[ -e "${home_dev}" ]]; then
sleep 0.5
NC "
==> [Linux (/Home) ${green}OK${nc}] "
fi
if [[ "${swapmode}" == "1" ]]; then
if [[ -e "${swap_dev}" ]]; then
sanity="ok"
sleep 0.5
NC "
==> [Linux Swap ${green}OK${nc}] "
else
sanity="no"
sleep 0.5
RED "
[!] Linux Swap Partition not detected "
sleep 0.5
YELLOW "
--> Please comply with the Discoverable Partitions Specification to continue..
### Ensure that a Linux Swap Partition with a valid GUID code ${nc}(8200)${yellow} is present on disk "
sleep 0.5
RED "
[!] Sanity Check Failed [!] "
sleep 2
reload
until disk_mngr; do : ; done
return 0
fi
fi
sanity="ok"
fi
[[ "${sanity}" == "ok" ]] && ok
}
###########################################################################################
ask_crypt (){
local prompt="Encryption Setup"
sleep 0.5
NC "
________________________
${purple}###${nc} Encryption Setup ${purple}###${nc}
"
BLUE "
> Enable "${roottype}" Encryption? [LUKS] "
NC "
* Type '${cyan}no${nc}' to proceed without encryption
* Type '${cyan}yes${nc}' to encrypt your "${roottype}"
"
read -p "
==> " encrypt
echo
if [[ "${encrypt}" == "no" ]]; then
skip
ok
return 0
elif [[ "${encrypt}" == "yes" ]]; then
sleep 0.5
YELLOW "
> Enter a name for your Encrypted "${roottype}" Partition: "
BLUE "
Enter a name: "
read -p "
==> " ENCROOT
echo
if [[ -z "${ENCROOT}" ]]; then
sleep 0.5
RED "
[!] Please enter a name to continue "
reload
return 1
elif [[ "${ENCROOT}" =~ [[:upper:]] ]]; then
sleep 0.5
RED "
[!] Uppercase is not allowed. Please try again.. "
reload
return 1
elif [[ -n "${ENCROOT}" ]]; then
sleep 0.5
NC "
==> [${green}Encrypted "${roottype}" Label OK${nc}] "
fi
if [[ -e "${home_dev}" ]]; then
if [[ "${fs}" == "1" ]]; then
sleep 0.5
YELLOW "
### A /HOME Partition has been detected "
sleep 0.5
BLUE "
> Encrypt /HOME partition? [LUKS] "
NC "
* Type '${cyan}no${nc}' to proceed without encryption
* Type '${cyan}yes${nc}' to encrypt your /HOME
"
read -p "
==> " homecrypt
echo
if [[ "${homecrypt}" == "no" ]]; then
skip
ok
elif [[ "${homecrypt}" == "yes" ]]; then
sleep 0.5
YELLOW "
> Enter a name for your Encrypted Home Partition: "
BLUE "
Enter a name: "
read -p "
==> " ENCRHOME
echo
if [[ -z "${ENCRHOME}" ]]; then
sleep 0.5
RED "
[!] Please enter a name to continue "
reload
return 1
elif [[ "${ENCRHOME}" =~ [[:upper:]] ]]; then
sleep 0.5
RED "
[!] Uppercase is not allowed. Please try again.. "
reload
return 1
elif [[ -n "${ENCRHOME}" ]]; then
sleep 0.5
NC "
==> [${green}Encrypted /HOME Label OK${nc}] "
ok
fi
else
sleep 0.5
RED "
[!] Please type 'yes' or 'no' to continue "
reload
return 1
fi
fi
fi
else
sleep 0.5
RED "
[!] Please type 'yes' or 'no' to continue "
reload
return 1
ok
fi
}
###########################################################################################
instl (){
install="yes"
if [[ -z "${SETLOCALE}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Locale & Keyboard Layout Selection' to continue
"
until slct_locale; do : ; done
until slct_kbd; do : ; done
fi
if [[ -z "${USERNAME}" ]]; then
sleep 0.5
RED "
[!] Please complete 'User, Root User & Hostname Setup' to continue
"
until user_setup; do : ; done
until rootuser_setup; do : ; done
until slct_hostname; do : ; done
fi
if [[ -z "${kernelnmbr}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Kernel & Bootloader Selection' to continue
"
until slct_krnl; do : ; done
until ask_bootldr; do : ; done
fi
if [[ -z "${fs}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Filesystem & Swap Selection' to continue
"
until ask_fs; do : ; done
until ask_swap; do : ; done
fi
if [[ -z "${vgaconf}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Graphics Setup' to continue
"
until dtct_vga; do : ; done
fi
if [[ -z "${packages}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Desktop Selection' to continue
"
until slct_dsktp; do : ; done
fi
if [[ -z "${efi_entr_del}" ]]; then
sleep 0.5
RED "
[!] Please complete 'EFI Boot Entries Deletion' to continue
"
until boot_entr; do : ; done
fi
if [[ -z "${wrlss_rgd}" ]]; then
sleep 0.5
RED "
[!] Please complete 'Wireless Regulatory Domain Setup' to continue
"
until wireless_rgd; do : ; done
fi
if [[ "${sanity}" != "ok" ]]; then
sleep 0.5
RED "
[!] Please complete 'Installation Disk' & 'Encryption' to continue
"
until instl_dsk; do : ; done
until ask_crypt; do : ; done
fi
#------------------------------------------------------------------------------------------
if [[ "${swapmode}" == "1" ]]; then
until "${swaptype}"; do : ; done
fi
if [[ "${encrypt}" == "no" ]]; then
until set_mode; do : ; done
until confirm_status; do : ; done
elif [[ "${encrypt}" == "yes" ]]; then
until sec_erase; do : ; done
until luks; do : ; done
until opt_pcmn; do : ; done
until pacstrap_system; do : ; done
if [[ "${swapmode}" == "2" ]]; then
until "${swaptype}"; do : ; done
fi
if [[ -n "${REGDOM}" ]]; then
until wireless_regdom; do : ; done
fi
until chroot_conf; do : ; done
fi
}
###########################################################################################
swappart (){
local prompt="Swap Partition"
sleep 0.5
NC "
_________________________________
${purple}###${nc} Swap Partition Activation ${purple}###${nc}
"
if mkswap "${swap_dev}"; then
ok
else
err_reload
until disk_mngr; do : ; done
until swappart; do : ; done
fi
}
###########################################################################################
set_mode (){
sleep 0.5
NC "
______________________
${purple}###${nc} Mode Selection ${purple}###${nc}
"
YELLOW "
> Select a Mode to continue: "
NC "
[1] Auto (Automatically Format, Label & Mount partitions)
[2] Manual (Manually Format, Label & Mount partitions) "
BLUE "
Enter a Mode number: "
read -p "
==> " setmode
echo
case "${setmode}" in
1)
until auto_mode; do : ; done ;;
2)
until manual_mode; do : ; done ;;
"")
RED "
[!] Please select a Mode to continue "
reload
return 1 ;;
*)
invalid
return 1 ;;
esac
sleep 0.5
NC "
------------------------------------------------------------------------------------------------------------
==> [${green}Filesystems OK${nc}]
"
sleep 0.5
lsblk -f
echo
sleep 1
}
###########################################################################################
auto_mode (){
sleep 0.5
YELLOW "
> Auto Mode Selected
"
sleep 1
if [[ "${fs}" == "1" ]]; then
if mkfs.ext4 -F -L Root "${root_dev}"; then
if mount "${root_dev}" /mnt; then
sleep 0.5
NC "
==> [${green}/ROOT OK${nc}]
"
else
umount_manual
until disk_mngr; do : ; done
until form_root; do : ; done
until mount_mnt; do : ; done
fi
else
umount_manual
until disk_mngr; do : ; done
until form_root; do : ; done
until mount_mnt; do : ; done
fi
#------------------------------------------------------------------------------------------
elif [[ "${fs}" == "2" ]]; then
mkfs.btrfs -f -L ROOT "${root_dev}" &&
mount "${root_dev}" /mnt &&
btrfs subvolume create /mnt/@ &&
btrfs subvolume create /mnt/@home &&
btrfs subvolume create /mnt/@cache &&
btrfs subvolume create /mnt/@log &&
btrfs subvolume create /mnt/@tmp &&
btrfs subvolume create /mnt/@snapshots &&
if [[ "${swapmode}" == "2" ]]; then
btrfs subvolume create /mnt/@swap
fi
if umount /mnt; then
mount -o "${sbvl_mnt_opts}",subvol=@ "${root_dev}" /mnt &&
if [[ "${swapmode}" == "2" ]]; then
mkdir -p /mnt/swap &&
mount -o rw,nodatacow,subvol=@swap "${root_dev}" /mnt/swap
fi
mkdir -p /mnt/{var/cache,home,var/log,var/tmp,"${snapname}"} &&
mount -o "${sbvl_mnt_opts}",subvol=@cache "${root_dev}" /mnt/var/cache &&
mount -o "${sbvl_mnt_opts}",subvol=@home "${root_dev}" /mnt/home &&
mount -o "${sbvl_mnt_opts}",subvol=@log "${root_dev}" /mnt/var/log &&
mount -o "${sbvl_mnt_opts}",subvol=@snapshots "${root_dev}" /mnt/"${snapname}" &&
if mount -o "${sbvl_mnt_opts}",subvol=@tmp "${root_dev}" /mnt/var/tmp; then
sleep 0.5
NC "
==> [${green}/@ OK${nc}]
"
else
umount_manual
until disk_mngr; do : ; done
until form_root; do : ; done
until mount_mnt; do : ; done
fi
else
err_abort
fi
fi
sleep 0.5
#------------------------------------------------------------------------------------------
if mkdir -pv /mnt/boot; then
if mkfs.fat -F 32 -n Boot "${boot_dev}"; then
if mount "${boot_dev}" /mnt/boot; then
sleep 0.5
NC "
==> [${green}/BOOT OK${nc}]
"
else
umount_manual
until disk_mngr; do : ; done
until form_efi; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
fi
else
umount_manual
until disk_mngr; do : ; done
until form_efi; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
fi
else
sleep 0.5
RED "
[!] Failed creating /mnt/boot directory "
abort
fi
sleep 0.5
#------------------------------------------------------------------------------------------
if [[ -e "${home_dev}" && "${fs}" == "1" ]]; then
BLUE "
> A /Home partition has been detected. Format as "${fsname}"? [y/n]
"
read -p "
==> " homeform
if [[ "${homeform}" == "y" ]]; then
if mkdir -pv /mnt/home; then
if mkfs.ext4 -F -L Home "${home_dev}"; then
if mount "${home_dev}" /mnt/home; then
sleep 0.5
NC "
==> [${green}/HOME OK${nc}]
"
else
umount_manual
until disk_mngr; do : ; done
until form_home; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
until mount_home; do : ; done
fi
else
umount_manual
until disk_mngr; do : ; done
until form_home; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
until mount_home; do : ; done
fi
else
sleep 0.5
RED "
[!] Failed creating /mnt/home directory "
abort
fi
elif [[ "${homeform}" == "n" ]]; then
skip
NC "
==> [${green}/HOME OK${nc}]
"
else
invalid
ask_homepart_form
fi
fi
}
###########################################################################################
manual_mode (){
if [[ -e "${home_dev}" ]]; then
if [[ "${fs}" == "1" ]]; then
until form_efi; do : ; done
until form_root; do : ; done
until form_home; do : ; done
until mount_mnt; do : ; done
mkdir -pv /mnt/{boot,home}
until mount_boot; do : ; done
until mount_home; do : ; done
elif [[ "${fs}" == "2" ]]; then
until form_efi; do : ; done
until form_root; do : ; done
until mount_mnt; do : ; done
mkdir -pv /mnt/boot
until mount_boot; do : ; done
fi
else
until form_efi; do : ; done
until form_root; do : ; done
until mount_mnt; do : ; done
mkdir -pv /mnt/boot
until mount_boot; do : ; done
fi
}
###########################################################################################
form_efi (){
sleep 0.5
NC "
_____________________________
${purple}###${nc} Format Boot Partition ${purple}###${nc}
"
form_boot_nmbr=" "
while [[ -n "${form_boot_nmbr}" ]]; do
YELLOW "
> Select a partition to format as EFI [/BOOT] "
NC "
${volumes} "
BLUE "
Enter a partition number ${bwhite}(empty to skip and proceed)${blue}: "
read -p "
==> " form_boot_nmbr
if [[ -n "${form_boot_nmbr}" ]]; then
bootpart="$(echo "${volumes}" | awk "\$1 == "${form_boot_nmbr}" { print \$2}")"
if [[ -e "${bootpart}" ]]; then
if mkfs.fat -F 32 -n Boot "${bootpart}"; then
sleep 0.5
NC "
==> [${green}Format /BOOT OK${nc}] "
sleep 0.5
NC "
==> [${green}Label /BOOT OK${nc}] "
return 0
else
umount_abort
until disk_mngr; do : ; done
until form_efi; do : ; done
return 0
fi
else
invalid
return 1
fi
fi
done
skip
}
###########################################################################################
form_root (){
sleep 0.5
NC "
_____________________________
${purple}###${nc} Format Root Partition ${purple}###${nc}
"
form_root_nmbr=" "
while [[ -n "${form_root_nmbr}" ]]; do
YELLOW "
> Select a partition to format as "${fsname}" ["${roottype}"] "
NC "
${volumes} "
BLUE "
Enter a partition number ${bwhite}(empty to skip and proceed)${blue}: "
read -p "
==> " form_root_nmbr
if [[ -n "${form_root_nmbr}" ]]; then
rootpart="$(echo "${volumes}" | awk "\$1 == "${form_root_nmbr}" { print \$2}")"
if [[ -e "${rootpart}" ]]; then
#------------------------------------------------------------------------------------------
if [[ "${fs}" == "1" ]]; then
if mkfs.ext4 -F "${rootpart}"; then
sleep 0.5
NC "
==> [${green}Format "${roottype}" OK${nc}] "
else
umount_abort
until disk_mngr; do : ; done
until form_root; do : ; done
return 0
fi
#------------------------------------------------------------------------------------------
elif [[ "${fs}" == "2" ]]; then
if mkfs.btrfs -f "${rootpart}"; then
mount "${rootpart}" /mnt &&
btrfs subvolume create /mnt/@ &&
btrfs subvolume create /mnt/@home &&
btrfs subvolume create /mnt/@cache &&
btrfs subvolume create /mnt/@log &&
btrfs subvolume create /mnt/@tmp &&
btrfs subvolume create /mnt/@snapshots &&
if [[ "${swapmode}" == "2" ]]; then
btrfs subvolume create /mnt/@swap
fi
if umount /mnt; then
sleep 0.5
NC "
==> [${green}Format "${roottype}" OK${nc}] "
else
sleep 0.5
RED "
[!] Unmounting failed "
abort
fi
else
reload
until disk_mngr; do : ; done
until form_root; do : ; done
return 0
fi
fi
else
invalid
return 1
fi
YELLOW "
> Label the "${roottype}" partition "
BLUE "
Enter a name ${bwhite}(empty to skip and proceed)${blue}: "
read -p "
==> " rootpartname
if [[ -n "${rootpartname}" ]]; then
if [[ "${fs}" == "1" ]]; then
e2label "${rootpart}" "${rootpartname}"
elif [[ "${fs}" == "2" ]]; then
mount "${rootpart}" /mnt &&
btrfs filesystem label /mnt "${rootpartname}" &&
umount /mnt
fi
if [[ "$?" -eq 0 ]]; then
sleep 0.5
NC "
==> [${green}Label "${roottype}" OK${nc}] "
return 0
else
err_try
until disk_mngr; do : ; done
until form_root; do : ; done
return 0
fi
fi
skip
NC "
==> [${green}Label "${roottype}" OK${nc}] "
return 0
else
skip
NC "
==> [${green}Format "${roottype}" OK${nc}] "
return 0
fi
done
}
###########################################################################################
ask_homepart_form (){
if [[ -e "${home_dev}" && "${fs}" == "1" ]]; then
BLUE "
> A /Home partition has been detected. Format as "${fsname}"? [y/n]
"
read -p "
==> " homeform
echo
if [[ "${homeform}" == "y" ]]; then
if mkdir -pv /mnt/home; then
if mkfs.ext4 -F -L Home "${home_dev}"; then
if mount "${home_dev}" /mnt/home; then
sleep 0.5
NC "
==> [${green}/HOME OK${nc}]
"
else
umount_manual
until disk_mngr; do : ; done
until form_home; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
until mount_home; do : ; done
fi
else
umount_manual
until disk_mngr; do : ; done
until form_home; do : ; done
until mount_mnt; do : ; done
until mount_boot; do : ; done
until mount_home; do : ; done
fi
else
sleep 0.5
RED "
[!] Failed creating /mnt/home directory "
abort
fi
elif [[ "${homeform}" == "n" ]]; then
skip
NC "
==> [${green}/HOME OK${nc}]
"
else
invalid
ask_homepart_form
fi
fi
}
###########################################################################################
form_home (){
sleep 0.5
NC "
_____________________________
${purple}###${nc} Format Home Partition ${purple}###${nc}
"
form_home_nmbr=" "
while [[ -n "${form_home_nmbr}" ]]; do
YELLOW "
> Select a partition to format as 'Ext4' [/HOME] "
NC "
${volumes} "
BLUE "
Enter a partition number ${bwhite}(empty to skip and proceed)${blue}: "
read -p "
==> " form_home_nmbr
if [[ -n "${form_home_nmbr}" ]]; then
homepart="$(echo "${volumes}" | awk "\$1 == "${form_home_nmbr}" { print \$2}")"
if [[ -e "${homepart}" ]]; then
if mkfs.ext4 -F "${homepart}"; then
sleep 0.5
NC "
==> [${green}Format /HOME OK${nc}] "
else
umount_abort
until disk_mngr; do : ; done
until form_home; do : ; done
return 0
fi
else
invalid
return 1
fi
YELLOW "
> Label the /HOME partition "
BLUE "
Enter a name ${bwhite}(empty to skip and proceed)${blue}: "
read -p "
==> " homepartname
if [[ -n "${homepartname}" ]]; then
if e2label "${homepart}" "${homepartname}"; then
sleep 0.5
NC "
==> [${green}Label /HOME OK${nc}] "
return 0
else
err_try
until disk_mngr; do : ; done
until form_home; do : ; done
return 0
fi
fi
skip
NC "
==> [${green}Label /HOME OK${nc}] "
return 0
else
skip
NC "
==> [${green}Format /HOME OK${nc}] "
return 0
fi
done
}
###########################################################################################
mount_mnt (){
sleep 0.5
NC "
____________________________
${purple}###${nc} Mount Root Partition ${purple}###${nc}
"
YELLOW "
> Select a partition to mount to /mnt "
NC "
${volumes} "
BLUE "
Enter your${nc} ${cyan}"${roottype}"${blue} partition number: "
read -p "
==> " mntroot_nmbr
echo
if [[ -n "${mntroot_nmbr}" ]]; then
rootpart="$(echo "${volumes}" | awk "\$1 == "${mntroot_nmbr}" { print \$2}")"
if [[ -e "${rootpart}" ]]; then
#------------------------------------------------------------------------------------------
if [[ "${fs}" == "1" ]]; then
mount "${rootpart}" /mnt
#------------------------------------------------------------------------------------------
elif [[ "${fs}" == "2" ]]; then
mount -o "${sbvl_mnt_opts}",subvol=@ "${rootpart}" /mnt &&
if [[ "${swapmode}" == "2" ]]; then
mkdir -p /mnt/swap &&
mount -o rw,nodatacow,subvol=@swap "${rootpart}" /mnt/swap
fi
mkdir -p /mnt/{var/cache,home,var/log,var/tmp,"${snapname}"} &&
mount -o "${sbvl_mnt_opts}",subvol=@cache "${rootpart}" /mnt/var/cache &&
mount -o "${sbvl_mnt_opts}",subvol=@home "${rootpart}" /mnt/home &&
mount -o "${sbvl_mnt_opts}",subvol=@log "${rootpart}" /mnt/var/log &&
mount -o "${sbvl_mnt_opts}",subvol=@snapshots "${rootpart}" /mnt/"${snapname}" &&
mount -o "${sbvl_mnt_opts}",subvol=@tmp "${rootpart}" /mnt/var/tmp
fi
#------------------------------------------------------------------------------------------
if [[ "$?" -eq 0 ]]; then
sleep 0.5
NC "
==> [${green}Mount "${roottype}" OK${nc}]
"
return 0
else
umount_abort
until mount_mnt; do : ; done
fi
else
invalid
return 1
fi
else
choice
return 1
fi
}
###########################################################################################
mount_boot (){
local prompt="Mount /BOOT"
sleep 0.5
NC "
____________________________
${purple}###${nc} Mount Boot Partition ${purple}###${nc}
"
YELLOW "
> Select a partition to mount to /mnt/boot "
NC "
${volumes} "
BLUE "
Enter your${nc} ${cyan}/BOOT${blue} partition number: "
read -p "
==> " mntboot_nmbr
echo
if [[ -n "${mntboot_nmbr}" ]]; then
bootpart="$(echo "${volumes}" | awk "\$1 == "${mntboot_nmbr}" { print \$2}")"
if [[ -e "${bootpart}" ]]; then
if mount "${bootpart}" /mnt/boot; then
ok
return 0
else
umount_abort
until mount_mnt; do : ; done
until mount_boot; do : ; done
fi
else
invalid
return 1
fi
else
choice
return 1
fi
}
###########################################################################################
mount_home (){
local prompt="Mount /HOME"
sleep 0.5
NC "
____________________________
${purple}###${nc} Mount Home Partition ${purple}###${nc}
"
YELLOW "
> Select a partition to mount to /mnt/home "
NC "
${volumes} "
BLUE "
Enter your${nc} ${cyan}/HOME${blue} partition number: "
read -p "
==> " mnthome_nmbr
echo
if [[ -n "${mnthome_nmbr}" ]]; then
homepart="$(echo "${volumes}" | awk "\$1 == "${mnthome_nmbr}" { print \$2}")"
if [[ -e "${homepart}" ]]; then
if mount "${homepart}" /mnt/home; then
ok
return 0
else
umount_abort
until mount_mnt; do : ; done
until mount_boot; do : ; done
until mount_home; do : ; done
fi
else
invalid
return 1
fi
else
choice
return 1
fi
}
###########################################################################################
confirm_status (){
local prompt="System Ready"
sleep 0.5
NC "
___________________________________
${purple}###${nc} Confirm Installation Status ${purple}###${nc}
"
BLUE "
> Proceed ? "
NC "
* Type '${cyan}yes${nc}' to continue installation
* Type '${cyan}no${nc}' to revise installation
"
read -p "
==> " agree
if [[ "${agree}" == "yes" ]]; then
ok
until opt_pcmn; do : ; done
until pacstrap_system; do : ; done
if [[ "${swapmode}" == "2" ]]; then
until "${swaptype}"; do : ; done
fi
if [[ -n "${REGDOM}" ]]; then
until wireless_regdom; do : ; done
fi
until chroot_conf; do : ; done
elif [[ "${agree}" == "no" ]]; then
reload
sleep 0.5
NC "
___________________________
${purple}###${nc} Unmount Filesystems ${purple}###${nc}
"
if umount -R /mnt; then
sleep 0.5
NC "
==> [${green}Unmount OK${nc}]"
else
sleep 0.5
RED "
[!] Unmounting failed "
abort
fi
revise
else
sleep 0.5
RED "
[!] Please type 'yes' or 'no' to continue.. "
reload
return 1
fi
}
###########################################################################################
revise (){
revision="yes"
until slct_krnl; do : ; done
until ask_bootldr; do : ; done
until ask_fs; do : ; done
until ask_swap; do : ; done
until dtct_vga; do : ; done
until slct_dsktp; do : ; done
until boot_entr; do : ; done
until wireless_rgd; do : ; done
until disk_mngr; do : ; done
until instl_dsk; do : ; done
until ask_crypt; do : ; done
if [[ "${swapmode}" == "1" ]]; then
until "${swaptype}"; do : ; done
fi
until set_mode; do : ; done
until confirm_status; do : ; done
}
###########################################################################################
sec_erase (){
local prompt="Secure Erasure"
sleep 0.5
NC "
___________________________
${purple}###${nc} Secure Disk Erasure ${purple}###${nc}
"
erase_dsk_nmbr=" "
while [[ -n "${erase_dsk_nmbr}" ]]; do
YELLOW "
> Select a disk for Secure Erasure ${red}[!] (CAUTION) [!]${yellow}
### A ${nc}reboot${yellow} is mandatory and will take effect immediately when done "
NC "
${disks}"
BLUE "
Enter a disk number ${bwhite}(empty to skip)${blue}: "
read -p "
==> " erase_dsk_nmbr
echo
if [[ -n "${erase_dsk_nmbr}" ]]; then
erasedrive="$(echo "${disks}" | awk "\$1 == "${erase_dsk_nmbr}" {print \$2}")"
if [[ -e "${erasedrive}" ]]; then
cryptsetup open --type plain -d /dev/urandom "${erasedrive}" temp &&
dd if=/dev/zero of=/dev/mapper/temp status=progress bs=1M oflag=direct &&
cryptsetup close temp
sleep 0.5
NC "
==> [${green}Drive "${erasedrive}" Erased OK${nc}] "
sleep 1
NC "
==> [${green}Rebooting${nc}] "
sleep 3
reboot
else
invalid
return 1
fi
else
skip
ok
fi
done
}
###########################################################################################
luks (){
sleep 0.5
NC "
_______________________
${purple}###${nc} LUKS Encryption ${purple}###${nc}
"
if cryptsetup -y -v luksFormat --label CRYPTROOT "${root_dev}"; then
if [[ "${rota}" == "0" ]]; then
cryptsetup --perf-no_read_workqueue --perf-no_write_workqueue --persistent luksOpen "${root_dev}" "${ENCROOT}"
else
cryptsetup luksOpen "${root_dev}" "${ENCROOT}"
fi
#------------------------------------------------------------------------------------------
if [[ "${fs}" == "1" ]]; then
if mkfs.ext4 -F -L ROOT /dev/mapper/"${ENCROOT}"; then
if mount /dev/mapper/"${ENCROOT}" /mnt; then
sleep 0.5
NC "
==> [${green}Encrypted Root OK${nc}]
"
else
err_abort
fi
else
err_abort
fi
#------------------------------------------------------------------------------------------
elif [[ "${fs}" == "2" ]]; then
if mkfs.btrfs -L ROOT /dev/mapper/"${ENCROOT}"; then
mount /dev/mapper/"${ENCROOT}" /mnt &&
btrfs subvolume create /mnt/@ &&
btrfs subvolume create /mnt/@home &&
btrfs subvolume create /mnt/@cache &&
btrfs subvolume create /mnt/@log &&
btrfs subvolume create /mnt/@snapshots &&
btrfs subvolume create /mnt/@tmp &&
if [[ "${swapmode}" == "2" ]]; then
btrfs subvolume create /mnt/@swap
fi
umount /mnt &&
mount -o "${sbvl_mnt_opts}",subvol=@ /dev/mapper/"${ENCROOT}" /mnt &&
if [[ "${swapmode}" == "2" ]]; then
mkdir -p /mnt/swap &&
mount -o rw,nodatacow,subvol=@swap /dev/mapper/"${ENCROOT}" /mnt/swap
fi
mkdir -p /mnt/{var/cache,home,var/log,var/tmp,"${snapname}"} &&
mount -o "${sbvl_mnt_opts}",subvol=@cache /dev/mapper/"${ENCROOT}" /mnt/var/cache &&
mount -o "${sbvl_mnt_opts}",subvol=@home /dev/mapper/"${ENCROOT}" /mnt/home &&
mount -o "${sbvl_mnt_opts}",subvol=@log /dev/mapper/"${ENCROOT}" /mnt/var/log &&
mount -o "${sbvl_mnt_opts}",subvol=@snapshots /dev/mapper/"${ENCROOT}" /mnt/"${snapname}" &&
mount -o "${sbvl_mnt_opts}",subvol=@tmp /dev/mapper/"${ENCROOT}" /mnt/var/tmp &&
sleep 0.5
NC "
==> [${green}Encrypted /@ OK${nc}]
"
else
err_abort
fi
fi
else
umount_abort
until luks; do : ; done
fi
#------------------------------------------------------------------------------------------
NC "
"
if [[ -e "${swap_dev}" ]]; then
if cryptsetup -y -v luksFormat --label CRYPTSWAP "${swap_dev}"; then
if [[ "${rota}" == "0" ]]; then
cryptsetup --perf-no_read_workqueue --perf-no_write_workqueue --persistent luksOpen "${swap_dev}" swap
else
cryptsetup luksOpen "${swap_dev}" swap
fi
if mkswap /dev/mapper/swap; then
sleep 0.5
NC "
==> [${green}Encrypted Swap OK${nc}]
"
else
err_abort
fi
else
umount_abort
until luks; do : ; done
fi
fi
#------------------------------------------------------------------------------------------
NC "
"
if [[ "${homecrypt}" == "yes" ]]; then
if cryptsetup -y -v luksFormat --label CRYPTHOME "${home_dev}"; then
if [[ "${rota}" == "0" ]]; then
cryptsetup --perf-no_read_workqueue --perf-no_write_workqueue --persistent luksOpen "${home_dev}" "${ENCRHOME}"
else
cryptsetup luksOpen "${home_dev}" "${ENCRHOME}"
fi
mkfs.ext4 -F -L HOME /dev/mapper/"${ENCRHOME}" &&
mkdir -p /mnt/home &&
if mount /dev/mapper/"${ENCRHOME}" /mnt/home; then
sleep 0.5
NC "
==> [${green}Encrypted Home OK${nc}]
"
else
err_abort
fi
else
umount_abort
until luks; do : ; done
fi
elif [[ "${homecrypt}" == "no" ]]; then
BLUE "
> A /Home partition has been detected. Format as "${fsname}"? [y/n]
"
read -p "
==> " homeform
echo
if [[ "${homeform}" == "y" ]]; then
if mkfs.ext4 -F -L HOME "${home_dev}"; then
mkdir -p /mnt/home &&
if mount "${home_dev}" /mnt/home; then
sleep 0.5
NC "
==> [${green}/Home OK${nc}]
"
else
err_abort
fi
else
umount_abort
until luks; do : ; done
fi
elif [[ "${homeform}" == "n" ]]; then
skip
NC "
==> [${green}/Home OK${nc}]
"
else
invalid
return 1
fi
fi
#------------------------------------------------------------------------------------------
if mkfs.fat -F 32 -n BOOT "${boot_dev}"; then
mkdir -pv /mnt/boot &&
if mount "${boot_dev}" /mnt/boot; then
sleep 0.5
NC "
==> [${green}/BOOT OK${nc}]
"
else
umount_abort
until luks; do : ; done
fi
else
umount_abort
until luks; do : ; done
fi
sleep 0.5
NC "
==> [${green}Encryption OK${nc}]"
sleep 0.5
NC "
------------------------------------------------------------------------------------------------------------------
==> [${green}Filesystems OK${nc}]
"
sleep 0.5
lsblk -f
echo
sleep 1
}
###########################################################################################
opt_pcmn (){
local prompt="PacMan"
countries="$(reflector --list-countries | sed 's|[0-9].*||' | sed 's|-.*||' | sed 's|Country.*||')"
list=(${countries})
sleep 0.5
NC "
_______________________
${purple}###${nc} Optimize PacMan ${purple}###${nc}
"
YELLOW "
> Select a country for your Arch Mirrors:
"
for countries in "${list[*]}"; do
echo ${countries}
done
BLUE "
Enter country name or code ${bwhite}(Empty for Defaults)${blue}: "
read -p "
==> " COUNTRY
echo
if [[ -z "${COUNTRY}" ]] ; then
sleep 0.5
NC "
==> [${green}Default Mirrors OK${nc}] "
elif [[ -n "${COUNTRY}" ]] ; then
NC "
"
if reflector --verbose -c "${COUNTRY}" -l 10 -p https -f 10 --sort rate --save /etc/pacman.d/mirrorlist; then
sleep 0.5
NC "
==> [${green}"${COUNTRY}"'s Mirrors OK${nc}] "
else
err_try
return 1
fi
fi
#------------------------------------------------------------------------------------------
YELLOW "
> Enable Pacman's 'Parallel Downloads' feature? [y/n] "
BLUE "
Enter [y/n]: "
read -p "
==> " parallel
echo
if [[ "${parallel}" == "y" ]]; then
sleep 0.5
YELLOW "
> Select number of Parallel Downloads [2-5] "
NC "
${green}**${nc} [2]
${cyan}***${nc} [3]
${yellow}****${nc} [4]
${red}*****${nc} [5] "
BLUE "
Enter a number: "
read -p "
==> " parallelnmbr
echo
if [[ "${parallelnmbr}" =~ ^(2|3|4|5)$ ]]; then
sed -i "s|#ParallelDownloads = 5|ParallelDownloads = "${parallelnmbr}"|g" /etc/pacman.conf
else
invalid
return 1
fi
sleep 0.5
NC "
==> [${green}"${parallelnmbr}" Parallel Downloads OK${nc}]"
elif [[ "${parallel}" == "n" ]]; then
skip
elif [[ -z "${parallel}" ]]; then
sleep 0.5
RED "
[!] Please make a selection to continue "
reload
return 1
else
invalid
return 1
fi
ok
}
###########################################################################################
pacstrap_system (){
local prompt="${desktopname}"
sleep 0.5
NC "
_______________________
${purple}###${nc} Pacstrap System ${purple}###${nc}
"
if [[ "${bootloader}" == "2" ]]; then
if [[ "${fs}" == "1" ]]; then
bootldr_pkgs="efibootmgr grub os-prober"
elif [[ "${fs}" == "2" ]]; then
bootldr_pkgs="efibootmgr grub-btrfs os-prober"
fi
fi
if [[ "${vendor}" == "Virtual Machine" ]]; then
basepkgs="base nano sudo vim "${bootldr_pkgs}" "${fstools}" "${kernel}" "${microcode}" "${vmpkgs}" "${devel}""
elif [[ "${vendor}" == "Nvidia" ]]; then
basepkgs="base linux-firmware nano sudo vim "${bootldr_pkgs}" "${fstools}" "${kernel}" "${kernel}"-headers "${microcode}" "${vgapkgs}" "${wireless_reg}" "${devel}""
else
basepkgs="base linux-firmware nano sudo vim "${bootldr_pkgs}" "${fstools}" "${kernel}" "${microcode}" "${vgapkgs}" "${wireless_reg}" "${devel}""
fi
case "${packages}" in
1) # NOTE: Plasma Desktop:
deskpkgs=""${basepkgs}" plasma konsole"
displaymanager="sddm"
bluetooth="bluetooth"
network="NetworkManager" ;;
2) # NOTE: Plasma & Systemd-boot & Wayland Desktop:
deskpkgs=""${basepkgs}" alsa-firmware alsa-utils arj ark bluedevil breeze-gtk btop ccache cups-pdf cups-pk-helper dolphin-plugins e2fsprogs efibootmgr exfatprogs fdkaac ffmpegthumbs firefox git glibc-locales gst-libav gst-plugin-libcamera gst-plugin-msdk gst-plugin-opencv gst-plugin-pipewire gst-plugin-qmlgl gst-plugin-va gst-plugin-wpe gst-plugins-ugly gstreamer-vaapi icoutils ipp-usb kamera kamoso kate kcalc kde-gtk-config kdegraphics-mobipocket kdegraphics-thumbnailers kdenetwork-filesharing kdeplasma-addons kdesdk-kio kdesdk-thumbnailers kdialog keditbookmarks kget kimageformats5 kinit kio-admin kio-gdrive kio-zeroconf kompare konsole kscreen kvantum kwrited latte-dock libappimage libfido2 libktorrent libmms libnfs libva-utils lirc lrzip lua52-socket lzop mac man-db man-pages mesa-demos mesa-utils nano-syntax-highlighting nss-mdns ntfs-3g okular opus-tools p7zip packagekit-qt5 pacman-contrib partitionmanager pdfmixtool pigz pipewire-alsa pipewire-pulse pkgstats plasma-browser-integration plasma-desktop plasma-disks plasma-firewall plasma-nm plasma-pa plasma-wayland-protocols plasma-wayland-session power-profiles-daemon powerdevil powerline powerline-fonts print-manager python-pyqt5 python-reportlab qbittorrent qt5-feedback qt5-imageformats qt5-virtualkeyboard qt5-xmlpatterns realtime-privileges reflector rng-tools sddm-kcm skanlite sof-firmware sox spectacle sshfs system-config-printer terminus-font timidity++ ttf-ubuntu-font-family ufw-extras unarchiver unrar unzip usb_modeswitch usbutils vdpauinfo vlc vorbis-tools vorbisgain wget xdg-desktop-portal xdg-desktop-portal-gtk xdg-desktop-portal-kde xsane zip zsh zsh-autosuggestions zsh-completions zsh-syntax-highlighting "${nrg_plc}"" ;;
3) # NOTE: Gnome Desktop:
deskpkgs=""${basepkgs}" gnome networkmanager"
displaymanager="gdm"
bluetooth="bluetooth"
network="NetworkManager" ;;
4) # NOTE: Xfce Desktop:
deskpkgs=""${basepkgs}" xfce4 lightdm-slick-greeter network-manager-applet"
displaymanager="lightdm"
network="NetworkManager" ;;
5) # NOTE: Cinnamon Desktop:
deskpkgs=""${basepkgs}" cinnamon blueberry lightdm-slick-greeter system-config-printer gnome-keyring "${terminal}""
displaymanager="lightdm"
bluetooth="bluetooth"
network="NetworkManager" ;;
6) # NOTE: Deepin Desktop:
deskpkgs=""${basepkgs}" deepin deepin-terminal deepin-kwin networkmanager"
displaymanager="lightdm"
network="NetworkManager" ;;
7) # NOTE: Budgie Desktop:
deskpkgs=""${basepkgs}" budgie lightdm-gtk-greeter arc-gtk-theme papirus-icon-theme network-manager-applet "${terminal}""
displaymanager="lightdm"
network="NetworkManager" ;;
8) # NOTE: Lxqt Desktop:
deskpkgs=""${basepkgs}" lxqt breeze-icons network-manager-applet sddm xscreensaver"
displaymanager="sddm"
network="NetworkManager" ;;
9) # NOTE: Mate Desktop:
deskpkgs=""${basepkgs}" mate mate-terminal mate-media blueman network-manager-applet mate-power-manager system-config-printer lightdm-slick-greeter"
displaymanager="lightdm"
bluetooth="bluetooth"
network="NetworkManager" ;;
10) # NOTE: Base System:
deskpkgs=""${basepkgs}" networkmanager"
network="NetworkManager" ;;
11) # NOTE: Custom System:
if [[ "${vendor}" == "Virtual Machine" ]]; then
deskpkgs="base sudo "${bootldr_pkgs}" "${custompkgs}" "${fstools}" "${kernel}" "${microcode}" "${vmpkgs}" "${greeter}""
else
deskpkgs="base linux-firmware sudo "${bootldr_pkgs}" "${custompkgs}" "${fstools}" "${kernel}" "${microcode}" "${vgapkgs}" "${wireless_reg}" "${greeter}""
fi ;;
esac
if pacstrap -K -i /mnt ${deskpkgs}; then
if [[ "${fs}" == "2" ]]; then
genfstab -t PARTUUID /mnt >> /mnt/etc/fstab
fi
ok
else
err_reload
return 1
fi
}
###########################################################################################
swapfile (){
local prompt="Swapfile"
sleep 0.5
NC "
___________________________
${purple}###${nc} Swapfile Activation ${purple}###${nc}
"
arch-chroot /mnt <<-SWAP
dd if=/dev/zero of=/swapfile bs=1M count=${swapsize}k status=progress &&
chmod 0600 /swapfile &&
mkswap -U clear /swapfile &&
swapon /swapfile
SWAP
if [[ "$?" -eq 0 ]] ; then
cat >> /mnt/etc/fstab <<-FSTAB
/swapfile none swap defaults 0 0
FSTAB
else
err_swapfile
fi
if [[ "$?" -eq 0 ]] ; then
ok
else
sleep 0.5
RED "
[!] Populating the 'fstab' file has failed "
abort
fi
}
###########################################################################################
swapfile_btrfs (){
local prompt="Btfrs Swapfile"
sleep 0.5
NC "
_________________________________
${purple}###${nc} Btrfs Swapfile Activation ${purple}###${nc}
"
arch-chroot /mnt <<-SWAP
btrfs filesystem mkswapfile --size ${swapsize}g --uuid clear /swap/swapfile &&
swapon /swap/swapfile
SWAP
if [[ "$?" -eq 0 ]] ; then
cat >> /mnt/etc/fstab <<-FSTAB
/swap/swapfile none swap defaults 0 0
FSTAB
else
err_swapfile
fi
if [[ "$?" -eq 0 ]] ; then
ok
else
sleep 0.5
RED "
[!] Populating the 'fstab' file has failed "
abort
fi
}
###########################################################################################
wireless_regdom (){
local prompt="Wireless-Regdom"
sleep 0.5
NC "
__________________________________
${purple}###${nc} Setting Up Wireless-Regdom ${purple}###${nc}
"
cat >> /mnt/etc/conf.d/wireless-regdom <<-REGDOM
WIRELESS_REGDOM="${REGDOM}"
REGDOM
if [[ "$?" -eq 0 ]] ; then
ok
else
err_reload
return 1
fi
}
###########################################################################################
chroot_conf (){
local prompt="Arch Linux"
sleep 0.5
NC "
_________________________________
${purple}###${nc} Chroot & Configure System ${purple}###${nc}
"
[[ "${kernelnmbr}" == "3" ]] && swapmode="3"
if [[ "${encrypt}" == "yes" ]]; then
encr_root_dev="/dev/mapper/"${ENCROOT}""
encr_root_opts="rd.luks.name=$(blkid -s UUID -o value "${root_dev}")="${ENCROOT}""
encr_root_bootopts="root="${encr_root_dev}" "${encr_root_opts}""
if [[ "${swapmode}" == "1" ]]; then
encr_swap_opts="rd.luks.name=$(blkid -s UUID -o value "${swap_dev}")=swap"
encr_swap_bootopts="resume=/dev/mapper/swap "${encr_swap_opts}""
elif [[ "${swapmode}" == "2" ]]; then
if [[ "${fs}" == "1" ]]; then
offst="$(filefrag -v /mnt/swapfile | awk '$1=="0:" {print substr($4, 1, length($4)-2)}')"
elif [[ "${fs}" == "2" ]]; then
offst="$(btrfs inspect-internal map-swapfile -r /mnt/swap/swapfile)"
fi
encr_swap_bootopts="resume="${encr_root_dev}" resume_offset="${offst}""
elif [[ "${swapmode}" == "3" ]]; then
encr_swap_bootopts=""
fi
if [[ "${vgaconf}" == "y" ]]; then
if [[ "${vendor}" == "Intel" ]]; then
mkinitcpio_mods="MODULES=(i915 "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)"
elif [[ "${vendor}" == "Nvidia" ]]; then
mkinitcpio_mods="MODULES=(nvidia nvidia_modeset nvidia_uvm nvidia_drm "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf block sd-encrypt filesystems fsck)"
vga_bootopts="modeset=1"
elif [[ "${vendor}" == "AMD" ]]; then
mkinitcpio_mods="MODULES=(amdgpu radeon "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)"
if [[ "${islands}" == "1" ]]; then
vga_bootopts="radeon.si_support=0 amdgpu.si_support=1 amdgpu.dc=1"
elif [[ "${islands}" == "2" ]]; then
vga_bootopts="radeon.cik_support=0 amdgpu.cik_support=1 amdgpu.dc=1"
elif [[ -z "${islands}" ]]; then
vga_bootopts="amdgpu.dc=1"
fi
fi
elif [[ "${vgaconf}" == "n" ]]; then
if [[ "${vendor}" == "Nvidia" ]]; then
mkinitcpio_mods="MODULES=("${fs_mod}" nouveau)"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)"
else
mkinitcpio_mods="MODULES=("${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block sd-encrypt filesystems fsck)"
fi
fi
boot_opts=""${encr_root_bootopts}" "${encr_swap_bootopts}" "${vga_bootopts}" "${cust_bootopts}" "${btrfs_opts}" "
#------------------------------------------------------------------------------------------
elif [[ "${encrypt}" == "no" ]]; then
if [[ "${swapmode}" == "1" ]]; then
swap_bootopts="resume=UUID=$(blkid -s UUID -o value "${swap_dev}")"
elif [[ "${swapmode}" == "2" ]]; then
if [[ "${fs}" == "1" ]]; then
offst="$(filefrag -v /mnt/swapfile | awk '$1=="0:" {print substr($4, 1, length($4)-2)}')"
elif [[ "${fs}" == "2" ]]; then
offst="$(btrfs inspect-internal map-swapfile -r /mnt/swap/swapfile)"
fi
swap_bootopts="resume=UUID=$(blkid -s UUID -o value "${root_dev}") resume_offset="${offst}" "
elif [[ "${swapmode}" == "3" ]]; then
swap_bootopts=""
fi
if [[ "${vgaconf}" == "y" ]]; then
if [[ "${vendor}" == "Intel" ]]; then
mkinitcpio_mods="MODULES=(i915 "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block filesystems fsck)"
elif [[ "${vendor}" == "Nvidia" ]]; then
mkinitcpio_mods="MODULES=(nvidia nvidia_modeset nvidia_uvm nvidia_drm "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf block filesystems fsck)"
vga_bootopts="modeset=1"
elif [[ "${vendor}" == "AMD" ]]; then
mkinitcpio_mods="MODULES=(amdgpu radeon "${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block filesystems fsck)"
if [[ "${islands}" == "1" ]]; then
vga_bootopts="radeon.si_support=0 amdgpu.si_support=1 amdgpu.dc=1"
elif [[ "${islands}" == "2" ]]; then
vga_bootopts="radeon.cik_support=0 amdgpu.cik_support=1 amdgpu.dc=1"
elif [[ -z "${islands}" ]]; then
vga_bootopts="amdgpu.dc=1"
fi
fi
elif [[ "${vgaconf}" == "n" ]]; then
if [[ "${vendor}" == "Nvidia" ]]; then
mkinitcpio_mods="MODULES=("${fs_mod}" nouveau)"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block filesystems fsck)"
else
mkinitcpio_mods="MODULES=("${fs_mod}")"
mkinitcpio_hooks="HOOKS=(systemd keyboard autodetect modconf kms block filesystems fsck)"
fi
fi
boot_opts=""${cust_bootopts}" "${swap_bootopts}" "${vga_bootopts}" "${btrfs_opts}""
fi
#------------------------------------------------------------------------------------------
# NOTE: All Vanilla Desktops Basic Configuration:
if [[ "${packages}" =~ ^(1|3|4|5|6|7|8|9|10)$ ]]; then
arch-chroot /mnt <<-VANILLA_CONF
sed -i "/^#${SETLOCALE}/s/^#//" /etc/locale.gen &&
locale-gen &&
echo LANG=${SETLOCALE} > /etc/locale.conf &&
export LANG=${SETLOCALE} &&
echo KEYMAP=${SETKBD} > /etc/vconsole.conf &&
update-pciids &&
echo "
${mkinitcpio_mods}
${mkinitcpio_hooks}
COMPRESSION_OPTIONS=(-c -T$(nproc) -)" | tee /etc/mkinitcpio.conf.d/custom.conf &&
mkinitcpio -P &&
ln -sf /usr/share/zoneinfo/$(curl -s http://ip-api.com/line?fields=timezone) /etc/localtime &&
hwclock --systohc &&
echo ${HOSTNAME} > /etc/hostname &&
echo "
127.0.0.1 localhost
::1 localhost
127.0.1.1 ${HOSTNAME}.localdomain ${HOSTNAME}" >> /etc/hosts &&
echo root:${ROOTPASSWD2} | chpasswd &&
useradd -m -G wheel -s /bin/bash ${USERNAME} &&
echo ${USERNAME}:${USERPASSWD2} | chpasswd &&
echo "
%wheel ALL=(ALL) ALL" | tee /etc/sudoers.d/sudoedits &&
visudo -c /etc/sudoers.d/sudoedits
VANILLA_CONF
if [[ -f /mnt/etc/lightdm/lightdm.conf ]]; then
if [[ "${packages}" == "6" ]]; then
arch-chroot /mnt <<-DEEPIN
sed -i 's|^#greeter-session=example-gtk-gnome|greeter-session=lightdm-deepin-greeter|g' /etc/lightdm/lightdm.conf
DEEPIN
elif [[ "${packages}" == "7" ]]; then
arch-chroot /mnt <<-GTK
sed -i 's|^#greeter-session=example-gtk-gnome|greeter-session=lightdm-gtk-greeter|g' /etc/lightdm/lightdm.conf
GTK
else
arch-chroot /mnt <<-SLICK
sed -i 's|^#greeter-session=example-gtk-gnome|greeter-session=lightdm-slick-greeter|g' /etc/lightdm/lightdm.conf
SLICK
fi
fi
if [[ "${bootloader}" == "1" ]]; then
arch-chroot /mnt <<-BOOTCTL
bootctl install --graceful &&
echo "default arch.conf" > /boot/loader/loader.conf &&
echo "
title ${entrname}
linux /vmlinuz-${kernel}
initrd /${microcode}.img
initrd /initramfs-${kernel}.img
options rw ${boot_opts}" | tee /boot/loader/entries/arch.conf &&
systemctl enable systemd-boot-update ${bluetooth} ${displaymanager} ${network} ${trim} ${vm_services}
BOOTCTL
elif [[ "${bootloader}" == "2" ]]; then
arch-chroot /mnt <<-GRUB
grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=GRUB &&
sed -i \
-e 's|^GRUB_CMDLINE_LINUX_DEFAULT.*|GRUB_CMDLINE_LINUX_DEFAULT="${boot_opts}"|g' \
-e "/^#GRUB_DISABLE_OS_PROBER=false/s/^#//" \
/etc/default/grub &&
grub-mkconfig -o /boot/grub/grub.cfg &&
systemctl enable ${bluetooth} ${displaymanager} ${network} ${trim} ${vm_services}
GRUB
if [[ "${bootloader}" == "2" && "${fs}" == "2" ]]; then
arch-chroot /mnt <<-GRUBBTRFSD
systemctl enable grub-btrfsd
GRUBBTRFSD
fi
if [[ "${vgaconf}" == "y" && "${vendor}" == "Nvidia" ]]; then
arch-chroot /mnt <<-NVIDIAGRUB
sed -i "/^#GRUB_TERMINAL_OUTPUT=console/s/^#//" /etc/default/grub &&
grub-mkconfig -o /boot/grub/grub.cfg
NVIDIAGRUB
fi
fi
if [[ "${vgaconf}" == "y" && "${vendor}" == "Nvidia" ]]; then
if [[ "${kernelnmbr}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "2" && ${nvdriver} == "2" ]]; then
arch-chroot /mnt <<-NVIDIAHOOK
sed -i "s|#HookDir = /etc/pacman.d/hooks/|HookDir = /etc/pacman.d/hooks/|g" /etc/pacman.conf &&
mkdir -p /etc/pacman.d/hooks/ &&
echo "
[Trigger]
Operation=Install
Operation=Upgrade
Operation=Remove
Type=Package
Target=${nvname}
Target=${kernel}
[Action]
Description=Update NVIDIA module in initcpio
Depends=mkinitcpio
When=PostTransaction
NeedsTargets
Exec=/bin/sh -c 'while read -r trg; do case $trg in linux*) exit 0; esac; done; /usr/bin/mkinitcpio -P' " | tee /etc/pacman.d/hooks/nvidia.hook
NVIDIAHOOK
fi
fi
if [[ "$?" -eq 0 ]]; then
ok
completion
else
err_instl_abort
fi
fi
#------------------------------------------------------------------------------------------
# NOTE: Plasma & Systemd-boot & Wayland Optimized System Configuration:
if [[ "${packages}" == "2" ]]; then
if [[ -n "${nrg_plc}" ]]; then
arch-chroot /mnt <<-NRG
${nrg_plc} performance
NRG
fi
arch-chroot /mnt <<-OPTIMIZED_CONF
sed -i "/^#${SETLOCALE}/s/^#//" /etc/locale.gen &&
locale-gen &&
echo LANG=${SETLOCALE} > /etc/locale.conf &&
export LANG=${SETLOCALE} &&
echo KEYMAP=${SETKBD} > /etc/vconsole.conf &&
sed -i "/^#Color/s/^#//" /etc/pacman.conf &&
balooctl disable &&
balooctl purge &&
update-pciids &&
echo '
${mkinitcpio_mods}
${mkinitcpio_hooks}
COMPRESSION_OPTIONS=(-c -T$(nproc) -)
MODULES_DECOMPRESS="yes"' | tee /etc/mkinitcpio.conf.d/custom.conf &&
mkinitcpio -P &&
cp -v /etc/makepkg.conf /etc/makepkg.conf.bak &&
sed -i \
-e 's|-march=[^ ]* -mtune=[^ ]*|-march=native|g' \
-e 's|^#RUSTFLAGS.*|RUSTFLAGS="-C opt-level=2"|g' \
-e 's|^#MAKEFLAGS.*|MAKEFLAGS="-j$(nproc)"|g' \
-e 's|^BUILDENV.*|BUILDENV=(!distcc color ccache check !sign)|g' \
-e 's|^COMPRESSGZ.*|COMPRESSGZ=(pigz -c -f -n)|g' \
-e 's|^COMPRESSBZ2.*|COMPRESSBZ2=(pbzip2 -c -f)|g' \
-e 's|^COMPRESSXZ.*|COMPRESSXZ=(xz -c -z --threads=0 -)|g' /etc/makepkg.conf &&
ln -sf /usr/share/zoneinfo/$(curl -s http://ip-api.com/line?fields=timezone) /etc/localtime &&
hwclock --systohc &&
echo ${HOSTNAME} > /etc/hostname &&
echo "
127.0.0.1 localhost
::1 localhost
127.0.1.1 ${HOSTNAME}.localdomain ${HOSTNAME}" >> /etc/hosts &&
echo "
net.core.netdev_max_backlog = 16384
net.core.somaxconn = 8192
net.core.rmem_default = 1048576
net.core.rmem_max = 16777216
net.core.wmem_default = 1048576
net.core.wmem_max = 16777216
net.core.optmem_max = 65536
net.ipv4.tcp_rmem = 4096 1048576 2097152
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.udp_rmem_min = 8192
net.ipv4.udp_wmem_min = 8192
net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_max_syn_backlog = 8192
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_keepalive_time = 60
net.ipv4.tcp_keepalive_intvl = 10
net.ipv4.tcp_keepalive_probes = 6
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_sack = 1
net.core.default_qdisc = cake
net.ipv4.tcp_congestion_control = bbr
net.ipv4.ip_local_port_range = 30000 65535
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.vfs_cache_pressure = 50
vm.mmap_min_addr = 65536
kernel.printk = 0 0 0 0
${perf_stream}" | tee /etc/sysctl.d/99-performance.conf &&
echo "
[defaults]
ntfs:ntfs3_defaults=uid=1000,gid=1000" | tee /etc/udisks2/mount_options.conf &&
echo '
// Original rules: https://github.com/coldfix/udiskie/wiki/Permissions
// Changes: Added org.freedesktop.udisks2.filesystem-mount-system, as this is used by Dolphin.
polkit.addRule(function(action, subject) {
var YES = polkit.Result.YES;
var permission = {
// required for udisks1:
"org.freedesktop.udisks.filesystem-mount": YES,
"org.freedesktop.udisks.luks-unlock": YES,
"org.freedesktop.udisks.drive-eject": YES,
"org.freedesktop.udisks.drive-detach": YES,
// required for udisks2:
"org.freedesktop.udisks2.filesystem-mount": YES,
"org.freedesktop.udisks2.encrypted-unlock": YES,
"org.freedesktop.udisks2.eject-media": YES,
"org.freedesktop.udisks2.power-off-drive": YES,
// Dolphin specific:
"org.freedesktop.udisks2.filesystem-mount-system": YES,
// required for udisks2 if using udiskie from another seat (e.g. systemd):
"org.freedesktop.udisks2.filesystem-mount-other-seat": YES,
"org.freedesktop.udisks2.filesystem-unmount-others": YES,
"org.freedesktop.udisks2.encrypted-unlock-other-seat": YES,
"org.freedesktop.udisks2.encrypted-unlock-system": YES,
"org.freedesktop.udisks2.eject-media-other-seat": YES,
"org.freedesktop.udisks2.power-off-drive-other-seat": YES
};
if (subject.isInGroup("wheel")) {
return permission[action.id];
}
});' | tee /etc/polkit-1/rules.d/99-udisks2.rules &&
mkdir -p /etc/systemd/journald.conf.d &&
echo "
[Journal]
SystemMaxUse=100M" | tee /etc/systemd/journald.conf.d/00-journald.conf &&
mkdir -p /etc/systemd/user.conf.d &&
echo "
[Manager]
DefaultTimeoutStopSec=5s
DefaultTimeoutAbortSec=5s" | tee /etc/systemd/user.conf.d/00-user.conf &&
sed -i 's|^hosts.*|hosts: mymachines mdns_minimal resolve [!UNAVAIL=return] files myhostname dns|g' /etc/nsswitch.conf &&
sed -i 's/ interface = [^ ]*/ interface = all/g' /etc/ipp-usb/ipp-usb.conf &&
sed -i "/# set linenumbers/"'s/^#//' /etc/nanorc &&
echo tcp_bbr | tee /etc/modules-load.d/modules.conf &&
echo "
country=${REGDOM}
wps_cred_add_sae=1
pmf=2" | tee /etc/wpa_supplicant/wpa_supplicant.conf &&
bootctl install --graceful &&
echo "default arch.conf" > /boot/loader/loader.conf &&
echo "
title ${entrname}
linux /vmlinuz-${kernel}
initrd /${microcode}.img
initrd /initramfs-${kernel}.img
options rw ${boot_opts}" | tee /boot/loader/entries/arch.conf &&
echo root:${ROOTPASSWD2} | chpasswd &&
chsh -s /bin/zsh &&
useradd -m -G wheel,realtime -s /bin/zsh ${USERNAME} &&
echo ${USERNAME}:${USERPASSWD2} | chpasswd &&
echo "
Defaults env_reset
Defaults pwfeedback
Defaults editor=/usr/bin/nano
%wheel ALL=(ALL) ALL" | tee /etc/sudoers.d/sudoedits &&
visudo -c /etc/sudoers.d/sudoedits &&
systemctl enable avahi-daemon bluetooth cups ipp-usb NetworkManager rngd sddm systemd-boot-update ufw ${trim} ${vm_services}
OPTIMIZED_CONF
if [[ "${vgaconf}" == "y" && "${vendor}" == "Nvidia" ]]; then
if [[ "${kernelnmbr}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "2" && ${nvdriver} == "2" ]]; then
arch-chroot /mnt <<-NVIDIAHOOK
sed -i "s|#HookDir = /etc/pacman.d/hooks/|HookDir = /etc/pacman.d/hooks/|g" /etc/pacman.conf &&
mkdir -p /etc/pacman.d/hooks/ &&
echo "
[Trigger]
Operation=Install
Operation=Upgrade
Operation=Remove
Type=Package
Target=${nvname}
Target=${kernel}
[Action]
Description=Update NVIDIA module in initcpio
Depends=mkinitcpio
When=PostTransaction
NeedsTargets
Exec=/bin/sh -c 'while read -r trg; do case $trg in linux*) exit 0; esac; done; /usr/bin/mkinitcpio -P' " | tee /etc/pacman.d/hooks/nvidia.hook
NVIDIAHOOK
fi
fi
if [[ "$?" -eq 0 ]]; then
ok
completion
else
err_instl_abort
fi
fi
#------------------------------------------------------------------------------------------
# NOTE: Custom System Configuration (Add any extra configuration below):
if [[ "${packages}" == "11" ]]; then
arch-chroot /mnt <<-CUSTOM_CONF
sed -i "/^#${SETLOCALE}/s/^#//" /etc/locale.gen &&
locale-gen &&
echo LANG=${SETLOCALE} > /etc/locale.conf &&
export LANG=${SETLOCALE} &&
echo KEYMAP=${SETKBD} > /etc/vconsole.conf &&
echo "
${mkinitcpio_mods}
${mkinitcpio_hooks}
COMPRESSION_OPTIONS=(-c -T$(nproc) -)" | tee /etc/mkinitcpio.conf.d/custom.conf &&
mkinitcpio -P &&
ln -sf /usr/share/zoneinfo/$(curl -s http://ip-api.com/line?fields=timezone) /etc/localtime &&
hwclock --systohc &&
echo ${HOSTNAME} > /etc/hostname &&
echo "
127.0.0.1 localhost
::1 localhost
127.0.1.1 ${HOSTNAME}.localdomain ${HOSTNAME}" >> /etc/hosts &&
echo root:${ROOTPASSWD2} | chpasswd &&
useradd -m -G wheel -s /bin/bash ${USERNAME} &&
echo ${USERNAME}:${USERPASSWD2} | chpasswd &&
echo "
%wheel ALL=(ALL) ALL" | tee /etc/sudoers.d/sudoedits &&
visudo -c /etc/sudoers.d/sudoedits
CUSTOM_CONF
if [[ -f /mnt/etc/lightdm/lightdm.conf ]]; then
if [[ "${greeternmbr}" == "1" ]]; then
arch-chroot /mnt <<-GTK
sed -i 's|^#greeter-session=example-gtk-gnome|greeter-session=lightdm-gtk-greeter|g' /etc/lightdm/lightdm.conf
GTK
elif [[ "${greeternmbr}" == "2" ]]; then
arch-chroot /mnt <<-SLICK
sed -i 's|^#greeter-session=example-gtk-gnome|greeter-session=lightdm-slick-greeter|g' /etc/lightdm/lightdm.conf
SLICK
fi
fi
if [[ "${bootloader}" == "1" ]]; then
arch-chroot /mnt <<-BOOTCTL
bootctl install --graceful &&
echo "default arch.conf" > /boot/loader/loader.conf &&
echo "
title ${entrname}
linux /vmlinuz-${kernel}
initrd /${microcode}.img
initrd /initramfs-${kernel}.img
options rw ${boot_opts}" | tee /boot/loader/entries/arch.conf &&
systemctl enable systemd-boot-update ${customservices} ${trim} ${vm_services}
BOOTCTL
elif [[ "${bootloader}" == "2" ]]; then
arch-chroot /mnt <<-GRUB
grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=GRUB &&
sed -i \
-e 's|^GRUB_CMDLINE_LINUX_DEFAULT.*|GRUB_CMDLINE_LINUX_DEFAULT="${boot_opts}"|g' \
-e "/^#GRUB_DISABLE_OS_PROBER=false/s/^#//" \
/etc/default/grub &&
grub-mkconfig -o /boot/grub/grub.cfg
GRUB
if [[ -n "${customservices}" || -n "${trim}" || -n "${vm_services}" ]]; then
arch-chroot /mnt <<-SERVICES
systemctl enable ${customservices} ${trim} ${vm_services}
SERVICES
fi
if [[ "${bootloader}" == "2" && "${fs}" == "2" ]]; then
arch-chroot /mnt <<-GRUBBTRFSD
systemctl enable grub-btrfsd
GRUBBTRFSD
fi
if [[ "${vgaconf}" == "y" && "${vendor}" == "Nvidia" ]]; then
arch-chroot /mnt <<-NVIDIAGRUB
sed -i "/^#GRUB_TERMINAL_OUTPUT=console/s/^#//" /etc/default/grub &&
grub-mkconfig -o /boot/grub/grub.cfg
NVIDIAGRUB
fi
fi
if [[ "${vgaconf}" == "y" && "${vendor}" == "Nvidia" ]]; then
if [[ "${kernelnmbr}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "1" ]] || [[ "${kernelnmbr}" == "2" && "${family}" == "2" && ${nvdriver} == "2" ]]; then
arch-chroot /mnt <<-NVIDIAHOOK
sed -i "s|#HookDir = /etc/pacman.d/hooks/|HookDir = /etc/pacman.d/hooks/|g" /etc/pacman.conf &&
mkdir -p /etc/pacman.d/hooks/ &&
echo "
[Trigger]
Operation=Install
Operation=Upgrade
Operation=Remove
Type=Package
Target=${nvname}
Target=${kernel}
[Action]
Description=Update NVIDIA module in initcpio
Depends=mkinitcpio
When=PostTransaction
NeedsTargets
Exec=/bin/sh -c 'while read -r trg; do case $trg in linux*) exit 0; esac; done; /usr/bin/mkinitcpio -P' " | tee /etc/pacman.d/hooks/nvidia.hook
NVIDIAHOOK
fi
fi
if [[ "$?" -eq 0 ]]; then
ok
completion
else
err_instl_abort
fi
fi
umount -R /mnt
exit
}
# ### END FUNCTIONS ###
###########################################################################################
run_as="$(whoami)"
tty="$(tty)"
disks="$(lsblk --nodeps --paths --noheadings --output=name,size,model | cat --number)"
SETLOCALE=""
USERNAME=""
kernelnmbr=""
fs=""
vgaconf=""
packages=""
efi_entr_del=""
wrlss_rgd=""
sanity=""
install=""
bootldr_pkgs=""
devel=""
REGDOM=""
vga_bootopts=""
btrfs_opts=""
trim=""
swapmode=""
homecrypt=""
greeter=""
revision=""
greeternmbr=""
cust_bootopts=""
bluetooth=""
vmpkgs=""
vm_services=""
clear
first_check
sleep 1
CYAN "
*********************************
### Arch Linux Installation ###
$(date)
*********************************
${bwhite}Press any key to start"
read -s -n 1
uefi_check
upd_clock
dtct_microcode
until main_menu; do : ; done
Reference in a new issue View git blame Copy permalink